A wood wall has a way of giving your room a unique modern look. If you do not have spare wood laying around in your backyard, doing this might cost you some money. However, the little you would have to spend would be worth it in the end.
After deep research, we were able to find 20 DIY wood wall ideas that you might like. Feel free to go through our list and pick your preferred idea.
1. DIY Wood Wall
The materials needed for this wood wall include pallets, black paint, paintbrush, drill, screws, and miter saw. Start by painting the wall in black. This is to avoid the possibility of showing white or any color of the wall in the gap left by the shiplap. Once the paints dry, start arranging the pallets on them in different sizes and lengths.
2. DIY Reclaimed Pallet Wood Wall
This is made from old pallets, plywood, screws, drywall anchor, and drill. Start by building a plywood wall. Then, disassemble the old palette and take out all the nails in them. After this, add glue to the pallet pieces and attach them to the plywood wall one after the other.
3. DIY Rustic Wood Wall
This rustic wood wall is very easy and cheap to set up. The visit to the building is $40 and requires less time to finish. The materials used include wood paneling planks, nail gun, Minwax fruitwood stain, and mix wax dark walnut stain. Start by cutting the wood panel into pieces, then stain them and all is them to dry. Once they are dried, install them on the wall.
See also: 25 DIY Wood Shelves
4. DIY Wood Wall And Floating Shelves
The materials needed include faux wood panels, stud finder, construction adhesive, brad nailer, the project saw, miter saw stand, super has, knot sealer, and floating shelf hardware. Start by measuring and marking the spot where the wood walk will start, then measure and mark below and above the Television. Once the measurement is done, locate the stud and start assembling the wood panels on the wall.
5. DIY Mixed Wood Wall
This is made from cheap wood paneling, Minwax classic grey, Minwax assorted stain, miter saw cups, gloves, rags, and paneling nails. Measure the wall and cut the wood paneling to size by making pieces of different sizes and lengths. Then lay the pieces on the ground as they will be on the wall and stain them. After this, take them one after another and attach them to the wall.
6. How To Build Wood Accent Wall
The materials needed for this DIY wood wall include tongue and groove boards, finish nail gun, stud finder, hammer, level, pencil, paintbrush, old rags, Minwax dark walnut stain, and Minwax wipe on poly. Locate and mark the stud, then cut the boards into pieces. After this, stain the pieces and install them on the wall.
7. How To Build A Pallet Wall
Start by gathering pallets around, then disassemble the palette into boards and take off the nails from it. Prepare a plywood background for the boards. After this, start installing the boards to the plywood using a drill and screws. The materials required for this DIY pallet wood wall include pallets, stain, drill, screws, level, miter saw, and a stud finder.
8. How To Plank A Wall For $30
The materials needed for this wall include underlayment plywood, spacer, nail gun, constructive adhesive, sparkling paste, and grit sandpaper. This project is very cheap and easy to set up. The total cost of making it is $30.
See also: 26 Wood Countertop Ideas
9. DIY Accent Plank Wall Build
Unlike other shiplap made from pallets or other types of boards, this is made from rough pine fencing boards. Cut out the curved edges of the fencing boards and stain each of the pieces in different types of stain. Allow the stain to dry on them and start citing them down in different sizes to give a beautiful pattern on the wall.
10. DIY Wood Wall Under $40
This is a very simple and inexpensive shiplap you can put up on your wall in a couple of hours. It is made from vinyl wood planks. Cut the planks into pieces of different sizes and lengths, then, stain the pieces and install them on the wall.
11. DIY Wood Wall
The materials needed for this include fencing boards, nail guns, a roof torch, a stud finder, measuring tape, gauge finishing nails, pencils, saw horses, latex paint, and a speed square. Start by locating the stud, Mark the spot, and rip down the boards into pieces. After this, paint the pieces and install them on the wall.
12. DIY Barn Wood Herringbone Wall
This is made from reclaimed wood, nails, miter saw, tape measure, and nail gun. Gather a lot of reclaimed wood that will cover your wall. Then, clean the words and cut them where necessary. After this, install them in the wall using a nail.
13. DIY Wood Wall
Start by covering the wall with sheets of OSB. This is to avoid hitting a metal stud when screwing the wood into the wall vertically. After this, stain the woods and allow them to dry. Install them on the OSB and you're good to go.
14. How To Make A Wood Wall
Start by measuring the height of the wall, then use the measurement to cut the wood into pieces. After this install the wood pieces into the wall. The materials used for this DIY wood wall include wood panels, hammer, nails, drill, meters, and saw.
15. DIY Wood Slat Wall
The materials needed for this wood wall include Pine boards, stain, screws, drill, miter saw, and an old rag. Cut the line boards into pieces and first test satin to see the outcome. Once you're satisfied with the outcome, stain the wood pieces and install them on the wall.
16. DIY Metallic Wood Wall Nursery
The materials used in making this DIY wood wall include a tape measure, painter’s tape, pencil, stud finder, miter saw, drill bits, sandpaper, drill gun, paint roller, latex primer, white wood boards metallic paint, and star drill trim screws. Start by calculating the dimension of the wall, then, cut the wood into pieces and paint them. After this attach the wood to the wall and you're good to go.
17. DIY Herringbone Accent Wall
The materials required for this herringbone accent wall include sheets of birch plywood, table saw, tape measure, safety google, nails, nail gun, paint, paintbrush, and level. First, cut the sheets of plywood into half, then start cutting each half into six inches boards. It is not necessarily six inches, you can use any size you want. After this, assemble the pieces on the wall in a zigzag pattern. Once the wall is set, paint the wood wall.
See also: 20 DIY Wall Sconce Ideas
18. DIY Accent Wall
The materials needed for this DIY accent wall include drill, tape measure, walnut boards, paintbrush, paint pail, paint tray, level, clamps, stud finder, wood glue, table saw, jigsaw, caulk gun, lesser level, compressor with a nailer, disc sander, and shop vac.
Start by clearing the wall; remove everything from the wall and repaint the wall. After this, Rip down the boards into pieces and paint them one after another.
19. DIY Wood Slat Ceiling
Start by attaching some furring strips below the ceiling at intervals. Then, cover the strips with a sheet of fiberglass. After this cove the glass with sheets of plywood.
Once the background is set. Cut some wood panels to pieces and stain them in your desired colors of stain, then install them on the plywood in the ceiling. The materials and tools used include wood panel, plywood, fiberglass, furring strips, nail, nail gun, tape measure, stud finder, and miter saw.
20. DIY Wood Wall Guide
The materials needed for this DIY wood wall include pallets, hammer, gauge finish nails, nails gun, stain, grit sandpaper, and tape measure. Disassemble the pallets and take out the wood pieces. Then, if you want a rustic look, you have to sand the pieces down and stain them. But if you want to go for a natural look, go straight to installing the pieces to the wall after disassembly.
These are the best and the most beautiful DIY wood wall projects you can see out there. They are simple and almost inexpensive to set up. They also require no prior skill or experience in woodworking. Have fun building your wood wall. If you have any questions or contributions regarding this article, use the comments section below to reach out to us.