Wall sconce adds charm and ambiance to your home. Following these simple steps, you can customize a more beautiful piece of art that lasts longer and on a low budget if you can't afford the expensive ones at the store.
We did some serious research and have been able to put together 20 amazingly outstanding DIY wall sconce ideas that you can make from the comfort of your home. Are you ready to get busy? Let’s begin!
Table of Contents
1. DIY Wall Sconce
Begin by bending the cooling rack halfway round. Glue pieces of flower mesh to rack, attach wires, and gems. Attach chandelier drops also. Glue reflective paper to sconce. Embellish sconce to your taste. Then put light on the inner wall of the sconce and use command strips to hang. Enjoy the ambiance it adds to your home!
2. DIY Modern Wall Sconce
Glue wooden dowels to each edge of 8 by 10 plaque then place another plaque of the same size on top. Place the anchor on the wall then attach the metal bracket to sconce and fix on the wall. Go on to place a flameless LED candlelight.
3. DIY Dollar Tree Glam Wall Light
Cut the foam board to the size of the kitchen shelf and pilot all four holes to fit the shelf. Cover with a folder and glue together. Paint them gold. Cover inside the sconce with glitter and mod podge, then feed light in a bracelet and secure with zip tie inside the sconce. Clamp gold rings inside to have your beautiful sconce then hang up.
4. How To Make A Wall Sconce
The simple materials for this work should be handy. After dividing the sugru glue strips into two and rolling each into a ball, stick each ball to a magnet. You firmly press one of the glued magnets against the drop cap pendant and leave it to dry for 24hrs, also stick the other magnet to the wall, and leave it to dry for 24hrs. Wire a plug to the pendant and place the pendant to the wall (place when the glue is dry) and enjoy the view.
5. DIY Turtle Shell Mosaic Sconce
This is a really unique wall sconce made out of turtle shells. Cut out the areas you want to remove at the back of the shell and sand the edges. Spray paint the inner shell and backside. On the textural outline draw gorilla wood glue along and one after the other firmly apply dried lentils and leave to dry. Do a full spray paint. Apply polished seashells. Use a pine board as a mounting plate, bolt your basic pull-chain light socket to the wall plate. Screw to turtle shell and hang your art piece.
You May Also Like: 26 Top Rustic Kitchen Wall Decor Ideas That You Can
6. How To Install Wireless Wall Sconces
With your LED puck light and 3AA batteries, attach the LED inside the sconce. Using a PVC adapter, glue to the back of the puck light with gorilla glue and leave to dry. They can be screwed in like a lightbulb when the glue is dry. Turn on the lights and enjoy!
7. DIY Pendant Lights With Rustic Wall Sconce
Cut your wood to size assembling it in a triangular form using glue and nails. Assemble the pendant light kit and move on to attach the cage and light bulb. Mount to the wall and you're done with this simple work.
8. DIY Faux Sconce Light
Get wired sconce at the store as well as lampshade and puck light, take off wiring from sconce. First glue lampshade to sconce, also glue puck light inside the seated shade holding to dry. Mount to the wall by screwing and that's it. The making process is pretty much straight-forward.
9. DIY Wall Sconce Dollar Tree
Hot glue placement to the first frame, and paperback to the second frame. Glue LED and string light to the second frame. Place the first frame on top and glue. At the back glue, the shark hooks and hangs them to the wall or makes them sit on a dresser.
10. DIY Dimmable Sconce With PVC
Get your PVC coupling and attach it to a size of plaque that fits the size of the coupling. Then spray paint. Glue dials to coupling in a stylish way. Use two lights, at the back of each attached velcro, then fix into the coupling one on top and the other below.
11. How To Make A Frugal Industrial Ish Wall Sconce
Form a triangle placing a 14-inch wood vertical and 12-inch wood horizontal and adjacent. Drill in screws to secure them together. Sand the edges and stain the sconce. Screw sconce the wall wrapping fabric cord around the sconce. Screw-in your lightbulb and that's it!. You can add a light cage around the bulb.
12. DIY Brass Globe Sconce
Ensure your needed materials are available as well as tools needed. Firstly thread your wire through the brass arm and on the shorter side of the arm attach a slip ring, gold & silver some of the necklace holders, brass socket cup, and silver top of porcelain socket. Assemble together and screw to the wall, next attach LED bulb and fix in the brass dome.
13. Boho DIY Wall Sconce
Here’s another easy DIY wall sconce idea. Cut your dowel rod to size and sand to smooth, stain the rod and let it dry. Pre-drill a hole on rod and wall, drive-in screws to the wall. Screw lightbulb to lamp kit stringing shade into it. Wrap rope cord around the dowel and let it hang in the position you want and you're done!
14. DIY Custom Wall Sconce
Cut out two pieces of 18 inches wood and two pieces of 9-inch wood. On the 9-inch piece drill two pocket holes and two bigger holes. Attach the shirt piece to the long piece using ¼inch pocket screws. Sand and spray paint. Attach to the wall using 2½ screws. Hang light and enjoy the view.
15. DIY Wall Sconce
Glue down your 5½inch shelf to 20 inches long pine. Drill screw from the back to secure, also sand, and stain the wood. Handscrew the eyelet to the shelf then attach the sconce to the wall. Use any light cage of your choice and hang up your light.
16. How To Make A Wall Sconce
Here’s another simple one that can be completed in no time. Construct a cube using wood. Attach decorative metal sheets at the sides and in front then spray or stain. When dry staple sheets to wood then use command strips to mount to the wall space with your light in place.
17. DIY Glam Wall Sconces
Get two fancy cups for use here and with a heat tool pilot hole at the bottom of the cups. Using a napkin ring, travel two circles on a foam board and cut them out. Decorate your cup and the ring, paint funnel, and apply glitter then add mod podge. Make a hole on the side of the napkin ring so the funnel can fit in.
With a hole in the middle of the foam board put the foam board in a napkin ring then glue the ring at the bottom of the first cup. Feed your string light through the second cup and onto the first then glue the bottom of the second cup on the napkin ring. Attach mirror to foam piece by gluing then fix funnel into a napkin ring and glue the open end to the back side of the mirror. Then hang up your piece to the wall.
You May Also Like: 25 DIY Napkin Holder Projects
18. Mirrored Wall Sconce DIY
Cut the foam board to the size of the mirror then use silver tape to cover up the edges. Glue mirror to foam board and use strips of mirror mosaic tiles to cover up the sides of foam board and round the mirror. Use liquid nails, clear seals on the mirror then spread crushed glass & silver glitter on it. Use a foam board and cardboard to construct a shelf. Glue gems to the shelf and also glue crushed glass. Spread glitter as well to the sides of the shelf. Let it dry. Glue shelf to the mirror and hang up. Then your beautiful sconce is all ready!
19. DIY Simple Wooden Wall Light
Get your piece of cedar wood then use Forstner bit to make a place to center sink the T-nut. Drill hole to insert the nut and apply gorilla glue inside and to the nut. Use a hammer to hit the nut in. At an angle drill hole and insert a bolt to the wall and twist brackets to the wall. Through the front thread wire and attach a bulb to the lamp holder on the wire.
20. DIY Wall Sconce Shades
Here’s Using miter cut your cardboard to size. Place the clip ring inside a cardboard tube using aluminum foil tape to hold the ring. Paint inside the tube and leave to dry. Gold leaf the inner surface. Wrap the outside with a linen-like canvas with about ½ inch overlap and tape the edges. Attach matching bias tape around the top and bottom to cover cut edges. Here you have a beautiful shade for your sconce.
Conclusion
If you are a fan of Wall Sconces you would agree with me that all the projects listed above are very beautiful and would make your home look a whole lot better. As beautiful as they look, wall sconces are pretty much easy to make. Feel free to go through all the listed DIY wall sconce projects and make your pick.
Ask Me Anything