Carrying around a bottle opener sometimes does not look professional. You can just allow your guests to serve themselves completely. There are different amazing DIY bottle openers you can create for this purpose.
We have put together 18 DIY bottle opener projects that you can DIY from home.
Table of Contents
1. How To Make A Bottle Opener
This is a wooden piece that is strapped to the wall. Don’t worry about it falling off because it is firmly secure. It has a small cup below where the caps fall into so it doesn’t litter around. Cedar fence planks were used for this so you can cut all the pieces out. Attach with wood glue and finishing nails. Fix the longer slap to the back and attach your zinc bottle opener. Finish with metal brackets.
2. DIY Magnetic Bottle Opener
This is a magnetic bottle opener where the caps can be attached to the wood using a magnet. To make this, you will need wood, magnets, wall mounted bottle opener, and liquid nails. Cut oak to length and miter corners. Route the edges. Drill the holes for magnets on the wood and add the bottle opener. Mount successfully.
3. DIY Bottle Opener Wall Mount
This wall mount bottle opener is unique and has style. It is made of wood and has a pocket where the lids drop into. You will need to work with wood materials. Measure and cut out the wood. Attach the back piece and bottom to the sides. Fit in the hardware bottle opener. The copper details are optional.
4. DIY Bottle Opener From Scrap Wood
If you don’t want to go through so much stress then you can help yourself with this simple project. It is less stressful and easy to recreate. You need a long skinny piece of scrap wood. Drill holes in it and insert nuts and bolts. Ready to use!
5. DIY Beer Bottle Opener
If you are a fan of the old fashion then this will be a fascinating project for you. Heat an old screwdriver and bend it. Cut a hole in an old shovel and shape the edges. You can do the same for an old chisel. Reduce one edge of an old spanner. Drill the edge of an old metal hammer. Bend the head of an old concrete screw nail. Slice through the head of an old hammer. Drill an opener hole in a saw. Heat and bend a circle knot then heat the tip of a flat mouth screwdriver on it.
6. DIY Wall Mounted Bottle Opener
Don’t you feel annoyed when you can’t find a bottle opener? Instead of putting yourself through that stress, create one for yourself. Measure and cut out your wood pieces. Glue them and get a couple of clamps. Attach the bottle opener to the top part of the longest piece of wood. You are good to go.
7. DIY Bottle Opener
This unique bottle opener is not made of wood. Guess what, it is made of steel! You will need a lot of firing to be done but in the end, you will get something substantial. Measure and cut out the piece you want to work with. Make a hole in the top center and form the bend for opening bottles. On the end create another hole for a firm grip.
8. Bottle Opener From Scrap
Making things from scrap can turn out to be a lot beneficial to you in the future. Instead of having to always look for one for yourself, you can always make a new one. The first step is to pick the wood and make the cuts. Sketch out the design and cut your pieces. Sand and drill holes. Finish and add washers.
9. DIY Bottle Opener
This DIY bottle opener is uniquely fixed to the wall so you don’t have to always go around searching for what to use to take off bottle lids. This is made of wood, resins, and magnets. The bottle opener can be gotten from the store and attached to the wood.
10. DIY Nail Bottle Opener
This bottle opener is simple and can be carried around anywhere. All you need is a single nail
and a block of wood. The first step is to build out your template. Cut it and sand. Mark where the nail should be. Put in the vice and bend. Drill holes for the nail and the magnet. Stain and paint the wood and finally insert the nail and magnet with glue.
11. Catapult Bottle Opener DIY
This DIY bottle opener reminds us of a catapult. As soon as it has contact with the lid and opens it up, the lid flies far and can hurt anyone who is within reach.to make this, you will need scrap wood, a screw with a v-shaped head, nails, and metal sticks. Work with a sketch to cut the wood. Sand and assemble. Drill holes for the metal stick. Screw into the lever then fit the parts together.
12. DIY Wall Bottle Opener
You can easily make a decorated wall bottle opener for yourself. To do this, spray 2 thin coats of primer on your wood then spray with white paint. Cover the entire board with frog tape. Attach your picture and carve out the inscription. Pull out the tape where you have carved and spray. Pull off the entire frog tape after it is dried then you have a designed board. Fit your opener to it.
13. Wall Mounted Bottle Opener
These home tools are really small hence they can get lost so easily. If it is strapped to somewhere then you will certainly know where it is. If you work with steel then bending this should not be difficult for you. Just come up with a pattern and get your tools to work.
14. How To Make A Bottle Opener
This is a handheld opener that has a firm grip on the hand. It works like magic, easy to use, and far exciting to make. To make the different stripes of wood there, take different colors of wood, cut to shape, and strap them together. Carve to the shape you want. Sand and screw in your opener.
15. DIY Modern Bottle Opener
You can choose any part of your kitchen to fasten your opener too. This is made of pixel glass and bottle openers. Place the opener at the center of the sheet and secure where the holes will be drilled. Paint the glass and attach the opener. I think this is a must-have for anyone who has a kitchen island.
16. Bottle Opener Key DIY
This is a unique opener made from a key. If the lock has been damaged then there is no need to throw the key away. It can also be useful. Use a regular bottle opener to get the shape for your keys. Trace the shape on the key. Cut and grind. Get ready to use it. The creator deserves some credit for coming up with this amazing and cost-saving idea. The making process requires some tools.
17. DIY Bullet Bottle Opener
This is a simple bottle opener made from a bullet casing. To make this, you will need to cut a wedge out of the bullet. You can use a hack saw then clean it up with a small file. Go halfway across the casting. Can I use this DIY bottle opener outdoors? Yes, you can! There’s no crime in carrying a bottle opener.
18. DIY Spanner Bottle Opener
Making a bottle opener using a spanner can be quite some work. If you have the perfect set of machines then this can work really well for you but if not, you may need to go through some stress. Cut out a part of the spanner so one looks longer than the other, then make the edges straight enough. Use the string on the sides so it won’t be slippery.
Conclusion
Purchasing a bottle opener is quite affordable, but trust me, you will feel a whole lot better and satisfied knowing that you made the DIY Bottle Opener yourself. In this article, there are a lot of options to choose from. Be sure to pick a project that you are sure of the materials and tools handy.
There are simple DIY Bottle Opener projects here and hard ones inclusive. Feel free to use the comments section below if you have any questions or contributions to add. Thanks for stopping by.
Ask Me Anything