Are you thinking of getting a picnic table fit for your next picnic party? Well, you just arrived at the right place. After hours of research, we were able to come up with some of the best picnic table plans that you can make for your home.
There are 25 DIY picnic table plans in this article, you will have to sit back, relax and determine which plan would be perfect for your home. Are you ready to build? Let’s dive in and see some amazing picnic table plans.
Table of Contents
1. DIY Strong Picnic Table Plans
A well-defined plan is necessary for this DIY picnic table because of the complexity of the shape and design. You can get the free and well-explained level by watching the video tutorial. The creator did a good job explaining how to make this strong picnic table.
2. How To Build A Picnic Table
The materials needed for this DIY picnic table include a compound miter saw, caulk gun, drill, layout square, and hammer. Start by assembling the legs of the table then attach the support to each side of the legs. After this assemble the tabletop and attach braces to it
3. How TO Build A Picnic Table With Built-in Cooler
This is made from pieces of wood, galvanized carriage bolts and nuts, deck screws, metal rails, 90-degree elbow, and circular saw, quick grips, hacksaw, construction adhesive, and sander. The tabletop of this amazing picnic table cone with a built-in cooler bin and replaceable cover.
See also: 24 DIY Gaming Table plans
4. DIY Picnic Table
The materials required in this DIY picnic table include pieces of wood, drill, wood glue, circular saw, speed square, bolts, nuts, and washer. Start by making the tabletop then attach braces to it for support. After this, measure and assemble the legs with the appropriate dimension so that the angles between the legs are correct.
5. DIY Hexagonal Picnic Table
Start by gathering the necessary materials; you need screws, 38 bolts, 38 nuts, 76 washers, 24 90degree angle brackets, and wood pieces. Cut and assemble the seats and fit them together in a hexagon shape. Then, cut the pieces for the tabletop and the other parts of the table. Assemble everything with screws and you have your picnic table.
6. DIY Picnic Table Plan
For this project, make a cutting list to make the work easier. Cut and assemble the two seats then move to the tabletop and the legs. Assemble the tabletop on the X-shaped legs then attach the two seats to each side of the table.
7. DIY Picnic Table Plans
The materials needed for this DIY project include wood, galvanized carriage bolts, and galvanized deck screws. Measure and cut the pieces for the tabletop, then, assemble them. After this, cut and assemble the table legs and the supports.
8. DIY 8 Foot Picnic Table
The materials required for this include a circular saw, power drill, galvanized deck screws, galvanized carriage boost, and tape measure. Cut all the pieces of wood needed for the project and start assembling the table after the others.
9. How To Build A Modern Picnic Table
Start by making a cutting list for the table and cut all the pieces to length. Then, build the two legs assemblies and attach the tabletop to it. After this, assemble the seats and attach them to the table.
10. Easy Picnic Table Build
The materials needed for this picnic table include wood, screws, oil-based pre-stain container oil-based spar urethane, stainless bolts, stainless nuts, and stainless washers. Assemble the tabletop and add a spacer to it, then attach cleats to the center of the tabletop. Cut and assemble the pieces for the legs.
See also: 25 DIY Bar Table Projects
11. DIY Octagon Picnic Table
This is made from 2×4 stocks, a miter saw tape measure wood screws, and spray paint. Start by cutting the pieces for the seats then assemble them with screws and fit the seats together to form an octagon shape. After this, assemble the tabletop in octagon shale as well and assemble the legs. Attach everything and you're good to go.
12. How To Build A 10’ Picnic Table
If you want a bigger picnic table that can accommodate more people at once, here is the best idea for you. It is made from deck screws, lag screws, wood boards, and wood glue. Measure and cut the pieces for the table then assemble each piece with screws.
13. DIY Picnic Table With Benches
This picnic table is made for as low as $95 and the time used in making it is approximately 4hours. Measure and cut the pieces for the tabletop and the legs. Assemble them separately and attach them together with screws. Then, cut and assemble the seats. Attach the seats to the table and you're good to go.
14. DIY Building Plans For A Picnic Table
This is made from wood, screws, glue, batten, and tape measure. Start by determining the dimension of the table then make the cutting list. After this, cut all the pieces that are needed and assembled with screws.
15. How To Build A 6 Foot Picnic Table
The materials needed for this picnic table include coated screws, coated Kreg screws, waterproof glue, water sealer, and carriage bolts. Start by cutting all the pieces needed for the table and assemble them with screws.
16. DIY Suitcase Picnic Table
This is made from an old suitcase and hairpin. Clean and prepare the suitcase then determine the maximum length of legs that can fold inside the suitcase. After this, measure and prep the hairpin for the legs. Attach paddings to the interior of the suitcase and line the interior and exterior with new fabric. Then, attach the hairpin to the corners of the suitcase and you're good to go.
17. DIY Picnic Table
This DIY picnic table is made from cedar boards, wood screws, a miter saw, tape measure, and paint. Cut all the pieces needed to fit the project then start assembling the pieces from the legs, then the tabletop, and then the seats.
18. DIY Detachable Bench Picnic Table
The materials needed for this DIY picnic table include a tape measure, boards framing square, wood glue, drill, push pad, craftsman sander, jigsaw, clamps, danish oil, and jigsaw blade. Cut the pieces needed for this project then prep them and assemble them with screw and glue.
See also: 20 DIY Table Legs Plans
19. DIY Luxury Picnic Table
This luxury picnic table is made from hardwood, screws, white acrylic paint, a tape measure, and a miter saw. Start by cutting the pieces for the tabletop then prep the pieces and assemble them with screws. Then, paint the tabletop and allow it to dry. Measure and cut the pieces for the legs and paint them as well, then attach both.
20. Free Picnic Table Plans
For this picnic table, get a plan to make it easier. However, you can get the free plan by clicking the link below. Start by cutting all the pieces needed and making the necessary angle cuts. Then, pass all the pieces through the planer and route all the edges. After this assemble them with screws.
21. DIY Convertible Picnic Table
The materials needed for this DIY convertible picnic table include a Kreg jig, cordless drill, miter saw, boards, utility hinges, wood glue, sandpaper, and stain. Cut the boards into pieces then assemble the legs and attach a bench stretcher to connect both legs. Then, assemble the tabletop and attach the tabletop to the legs and you're good to go.
22. DIY Kids Picnic Table
First, gather the materials and tools needed for this then cut all the pieces needed for the table and paint each piece with your desired color. After this, assemble the pieces and attach them in place with screws.
23. DIY Children’s Picnic Table
Start by cutting the pieces for the tabletop and support. Then, drill pocket holes on the pieces of the tabletop support and assemble the tabletop and the support. After this, assemble the table legs and drill pocket holes at the center of the leg’s top. Assemble everything with screws and attach the seats.
24. DIY Picnic Table Plans
Start by determining the dimension of the table then make the cutting list. Once the cutting list is ready, take out the wood and cut it down to pieces according to the list. After this, assemble the table and the seats and you're good to go.
25. DIY Modern Picnic Table
This modern picnic table is made from wooden boards, wood screws, wood glue, deck screws, miter saw, tape measure, circular saw, and spray paint. Start by making the cutting list for this table then rip the wooden boards down into pieces. After this, assemble the pieces with screws and you're good to go.
Being indecisive is normal, especially when there are many options to choose from. If you are having a hard time choosing, contact us via the comment section with details like your favorite color, and other information that will help us suggest the right DIY picnic table plan for you. Thanks for stopping by!