That relaxed feeling that a swing gives you literally to die for. We have had a porch swing in my family house for as long as I remember, I always use it to clear my mind. We even built it ourselves and didn’t have to spend too much.
If you are planning on building a porch swing, then, you are in the right place. Below, you will find 24 DIY porch swing plans that you can DIY for your home. Trust me, the whole family will love it after you’re done.
Table of Contents
1. DIY Easy Porch Swing
This amazing porch swing is made from a 2×6 base and 2×4 frame. Start by making the frame assembly. Cut the boards into 2×4 pieces, organize and join them to form the frame. After this, cut and assemble the 2×6 pieces for the base and attach a cushion to it.
2. DIY $40 Porch Swing
The materials needed for this include wood, chain, and mounting hardware.
First, cut all the pieces needed for the project and start building the frame. After this, attach the chain to the chair frame and you're good to go.
3. DIY Porch Swing Build
To make this, gather the materials needed for the porch swing. After this, cut and assemble the pieces for the swing. The material used includes wood, wood screws, rope/chain, and hooks.
4. Free Porch Swing Plans
This is made from wood, exterior screws, chain, wood stain, and drill. Start by making the seat assembly then attach the back panel to it with screws. After this, make the armrest assembly and join it to the frame.
5. How To Build A Porch Swing Bed
The materials needed for this include clear pine, knotty pine, framing lumber, finish nailer, sandpaper, wood filler, wood glue, wood stain, eye screws, and finish nails. Start by building the frame for the seat then prepare the cushion and place it inside the frame. After this, attach hooks to the four corners of the frame and another four screws in the ceiling where the rope will pass through to hang the frame.
6. DIY Porch Swing Plans
This is very simple to set up and it costs between $75 to $150. It is made from boards, Kreg screws, grit sandpaper, lag screws with washers, wood glue, drill, Kreg jig, and miter saw. First, make a cutting list and cut down the boards into pieces. Assemble the back pieces and attach bottom support and slat. Then, assemble the armrest and join all of them together. After this, sand and stain the swing chair then hang it with rope.
7. DIY Porch Swing Plans
The materials needed to build this porch swing include wood, deck screws, miter saw, jigsaw, tape measure, and paint. Measure and cut the wood into pieces. Assemble the back and bottom panels and attach them with screws. After this, paint the chair frame in white and attach hooks to both sides of the base and both sides of the back panel where the frame will be hung.
8. Building A Porch Swing
To build this you need a well-explained plan. You can download an exclusive plan for this project by clicking the link below. It consists of a cutting list and examples. Start with the assembly of the armrests then assemble the back panel and seat.
9. How To Build A Porch Swing
Start by making the design for the seeing using fission 360. Then, lay out the pieces of wood needed and start building. It is very simple and inexpensive.
10. DIY Porch Swing
The materials needed for this include an air compressor, wood, nail gun, miter saw, table saw, exterior screws, drill, and drill bits. Measure and cut the wood to size then assemble them to form a chair frame. After this, attach hooks to the base of the frame and knot the rope through the hooks to hang the swing.
11. DIY Mission Style Porch Swing
The required materials needed to build this swing include pine, drill press, router, drill bits, scroll saw, drill, miter saw, clamps, and driver. Measure and cut the pine to size then pass the pieces through the router and sand them down. After this, assemble the swing and you're good to go.
12. DIY Wooden Porch Swing
This is made from wood, chain, hooks, screws, miter saw, and tape measure. Start by making the seat frame. Cut the seat support some inches longer than your desired length for the seat panel. Attach braces to the support and the seat, then assemble the back support and the back pieces. Hang the swing with a chain.
13. DIY Heavy Duty Porch Swing
Getting started with this DIY project, first gather the materials and tools needed, then start by making the swing frame. Assemble the back and seat support then attach braces to it to form the chair frame. After this, paint the frame and hang it with a chain.
14. DIY Porch Swing
The materials needed for this include flat washers, nylon nuts, carrier bolts, small S hooks, chains, and exterior screws. Start by building the back and seat support then screw the braces to the skeleton to form the chair frame. After this, cut and decorate the armrest, then attach it to the chair frame and hang the swing with a chain.
15. How To Build A 2x4 Porch Swing
Start by making the arm assemblies then make the seat support and attach braces to it. After this, attach the seat to the arm assemblies then attach the back panel. Using the eye bolts, attach hooks to the base of the frame and hang the frame with a chain.
16. DIY Porch Swing Less Than $100
The cost of building this porch swing is less than $100 and yet it's very unique and strong. Cut all the pieces needed for the swing then assemble the back and seat support. Attach upright braces to the back support and screw them tightly. Assemble other parts and hang the swing.
17. How To Build Porch Swing
Start by laying down the seat and back support for the chair and attach them with screws. After this, cut wooden braces and screws them to the back and seat support.
18. How To Make A DIY Porch Swing
This DIY porch swing is made from metal steel, soldering kits, chain, and tape measure. Cut the metal steel into pieces then assemble the seat and back skeleton for the chair and weld them together.
19. DIY Porch Swing Frame
The materials needed for this DIY porch seeing frame include wood, miter saw, super jaw, wood glue, mallet, and circular saw. First, cut and assemble the A-shaped leg that runs from the ground to the top of the swing. A long piece of wood is connecting the two legs and this piece is where the chain of the swing will be hooked too
20. DIY Porch Swing
Start by making a cutting list for this project then gather the materials needed. Start by making the frame assembly then attach the back pieces and assemble the arm on it. Then, assemble the braces for the seat on it and attach hooks to the base.
21. DIY Porch Swing Plans
To make this, start by making a plan for the structure and gather the materials and tools needed to build the swing. Measure and cut all the pieces of wood needed for the frame. Then, make the frame assembly and attach braces to it with screws. After this, assemble the armrest and attach hooks to the frame.
22. How To Build A Porch Swing
Start by making the frame for the seat. The frame is made from 2×4 and 2×6 pieces. Cut the pieces to size and drill pocket holes on all of the pieces. Assemble the pieces with pocket hole screws then hang the seat with rope.
23. DIY Outdoor Porch Swing
The materials needed for this include boards, wood screws, brad nails, nail gun, jigsaw, Kreg jig, ticket hole screws, and table saw. Start by making the seat support then make it through to the bottom of the support. After this, attach 2×4 pieces to the grooves and place the seat on them. Then assemble the armrest and drill two holes each on the armrest.
24. DIY Porch Bed Swing
Start by making the frame for the bed with 2×4s. Cut two 2×4s to 75 inches and another two 2×4 to 35 inches. Assemble the frame and cover it with fabric, then, prepare the mattress and place it on the frame.
Conclusion
Thanks to this compilation, you do not have to spend too much to hire someone to build a porch swing for you. Go through our list of DIY porch swing plans, choose your preferred, gather the necessary tools and materials and start building.
Ask Me Anything