Have you ever wanted to have a bar table in your house or backyard? You don't have to spend much money on getting one from the store when you can actually spare some time and create one for yourself.
These 25 DIY bar tables will guide you on how to make any bar table of your choice. Go through our list, decide which works best for you, and start with the building process. You’ll be glad you did.
1. DIY Pub Table
This bar table is made from wood, a miter saw, pencil, glue, and ruler. Start by making the tabletop. Cut five pieces of wood and join them together with glue then clamp them tightly for 24 hours so that it will dry very well and excess glue will be squeezed out. After this, frame the board with pieces of wood
2. DIY Bar Table
Start by cutting the pieces for the table then cut the pieces for the table frame and the legs. Join the pieces separately and assemble them. Paint the legs in a double layer of white paint and stain the tabletop with wood stain.
3. How To Build A Bar Height Table
This bar height table is made from a miter saw drill, screw, wood, glue, clamps, and tape measure. Cut the pieces for the tabletop (board), glue them and clamp them together tightly. Once they are dry, remove the clamps and sand the whole surface. Then make the board edges, predrill holes on the wood pieces and screw them to the board. Then, move forward to frame the board and attach the legs.
4. How To Build An Outdoor Bar Table
The materials needed for this DIY bar tank include a measuring tape, Kreg jig, miter saw, wood, bar clamps, clamps. Start by selecting the best of the wood for the tabletop then measure and cut the pieces to fit the board. Drill pocket holes in the pieces and screw them together. Assemble all the parts and satin everything.
5. How To Build A Bar Table
This is made from plywood, lumber, screws, wood glue, wood stain, drill, jigsaw, and miter saw. Start by cutting all the pieces needed for the project then stain them and fill the holes in them with wood filler. Screw the pieces for the frame and screw the tabletop to it and you're good to go, but don't forget to smooth the surface and edges of the pieces with sandpaper.
6. DIY Outdoor Bar Table
The materials needed for this DIY outdoor bar table are tape measure, drill, miter saw, Kreg jig, speed square, lumber, and sander. Start by making the table legs. Join all the pieces of legs using a Kreg jig then move forward to the tabletop. Attach the tabletop and sand the whole table then paint.
7. DIY $25 Pub Table
To get an accurate measurement for this pub table, it depends on the chair you want to use. The table height must be 12 inches higher than the height of the chairs and for the width, add the length of each chair and add one inch to it and you have the width of the table. This table is very unique in its way.
8. Making A Bar Table With Shelves
The materials needed for this DIY portable bar table include wood, miter saw, Kreg jig, pocket hole screw, drill, and grit sander. Assemble the tabletop. The tabletop is in the form of a shelf, pre-drill pocket jokes on the pieces and join them together. Make the legs and assemble everything.
9. How To Make An Outdoor Bar Table
This was made from lumber, screw, drill, paint, and miter saw. Start by making the legs. Cut all the pieces needed for the legs and make a groove on the main legs just 2inchesaway from the ground. Attach the leg support to these grooves and screw it in tightly.
10. DIY Lumberjack Bar Table
To make this amazing and beautiful bar table you must first find the log that is suitable for this purpose and determine the diameter you wish for the tabletop and leg. Cut the tabletop bottom a log of an oak tree. You can use a chainsaw to cut through the diameter but if the chainsaw is not long enough, you have to be a little bit creative about the cutting to a planer cut.
11. LED Bar Table DIY
Making this LED bar table can be easier and simple if you have a skill in soldering or have the ability to work with metal. It is made from opaque acrylic sheet, insulating tape, strong tape, metal flat bar, nice and strong legs, AC plug, and adapter. Drill a hole on the border of the acrylic sheet and place the LED inside the holes. Connect all the power supply components and place the acrylic sheet on the tabletop bar.
12. DIY Horseshoe Bar Table
This horseshoe bar table is made from pine wood, wood stain, polyurethane, and sandpaper. Cut the tabletop from a log of pinewood using a chainsaw but if you don't have that you can use any other case that is capable of cutting through the pine wood. Then, determine the length of the stand and remove the bark from it. Use sandpaper to smoothen the wood stand then stain the stand and the tabletop. After this, attach the tabletop to the stand and you have your beautiful bar table.
13. How To Build A Bar Table
The materials needed for this are wood, wood planer, electric sander, Kreg jig, Kreg screws, and tape measure. Pre-drill pocket holes on the pieces and start assembling the pieces for the table too and screw them together then move to the legs. Screw the pieces for the legs together and attach the tabletop to the leg. Paint it once the table is done.
14. DIY Bar Top Console Table
This is made from construction grade pine but that is not necessarily what you should use for your own if you can't get grade pine you can make do with any other log of wood. Before assembling the tabletop pieces for joining, first run them through the jointer to make the edges smooth then gather them and glue them together. Then, assemble the legs and paint the table once it's done.
15. How To Build IKEA Bar Table
Get an IKEA table shelf at an affordable price then turn it upside down and drill holes at one side of the self bottom and screw into it two-floor flanges. Then, flip it to the right side again and place long plywood on it as the tabletop attaches the tabletop tongue shelve using screws and drill.
16. DIY Coffee Bar Table
To make this project easier, create the table in sections then come back and attach each section. Since the leg of this bar table is made from pipes, connect the pipes and attach the necessary fittings and the flange fittings as well. After the table leg is done, move to the tabletop.
17. DIY High Top Table
The materials needed for this DIY high table include pine board, Kreg jig, electric sander, jigsaw, Kreg screw, wood stain, and glue. Start by cutting the circular board for the tabletop, smoother the edges of the board with an electric sander, and stain the board. Then, move to the table leg.
18. DIY Modern Reclaimed Pub Table
The materials needed for this modern pub table include pine, plywood, pocket hole jig, pocket hole screw, and brad nail. Start by making the base for the table. Cut the pieces and assemble them, then stain the structure. After this assemble the tabletop and attach the centerboard.
19. Hairpin Bar Table DIY
Get a piece of a wooden board, sand the table down to make it smooth then paint the board. After the paint has dried, stain the board and pre-drill holes on it where the hairpin stand will be attached to.
20. DIY Bar
This simple and low-cost DIY board is made from wood, drew, glue, stain, and miter saw. Cut all the pieces needed for the table and start assembling the table legs. Join the legs together and stitch the support at the appropriate position then attach the tabletop.
21. How To Make A Patio Bar
This amazing DIY has three sections; the wooden base, the concrete tabletop and the LED lights. Start by making the frame for the table legs and once the frame is done, attach pickets to all the sides and screw the caster wheel to the base. After this, prepare the concrete and assemble every other component.
22. DIY Wall Mounted Bar Table
The materials needed for this DIY wall-mounted bar table include a wood bar, wood screw, rubber pads, and metal hinges. First, determine the height of the bar table from the wall then screw a piece of wood to this position. Using T-hinges, attach the tabletop to the wall and assemble the table leg.
23. DIY Outdoor Bar Table
Start by cutting the pieces fit the board and drill pocket holes at the top and bottom of every piece then screw them to a horizontal support bar at the top and the bottom. Assemble the legs and screw them together.
24. DIY Salvaged Industrial Bar Table
Get an old trunk tire, rip it and bring out the rim of the tire. Use the rim as the base of the table then weld a long metal bar to it as the stand for the table. Then attach a round plate to the bar and weld tubing under the plate to hold the plate firmly to the bar.
25. DIY Concrete Pub Table
The materials needed for the DIY pub table include a miter saw, jigsaw, chisel, flat pry bar, tape measure, drill, concrete, and straight edge. This pub table has a wooden base and concrete top. Prepare the concrete mold with a round knockout in the center and four small square knockouts at every corner. Mix the concrete and fill the mold and allow it to dry very well. While waiting for the concrete to dry, assemble the wooden legs.
I have done my part to list the best DIY bar table projects out there. It is left for you to decide which one best suits your style and start with the building process. Building a DIY Bar table isn’t as hard as it may seem, you should be done in no time.