A noodle board can also be called a stovetop cover that can be used for many purposes.
Do you need more space on your kitchen counter? Do you want to secure the glass top of your stove? Or you want to hide your unsightly stovetop, you may probably want a stovetop cover just for decoration.
This guide got you covered on any of your motives to build a noodle board. We have included 25 amazingly outstanding guides that show how to make a stovetop cover. All the DIY noodle board projects listed are beautiful and would be fun to make. You should check them out.
1. DIY Farmhouse Noodle Board
The first DIY on my list is this farmhouse noodle board. It is made from wood, drill, screw, and wood glue. Cut all the pieces of wood needed for the project, lay the 4 pieces for the base close to each other, and glue them together. Place two pieces of wood one at each edge of the base and nail it down. The process is short and the result is worth it.
2. How To Make A Noodle Board
This noodle board is made from wood glue, screw glue, drill, and hinges. Start by cutting the piece for the big board, attach a strap of wood and glue it to the edge of the board, repeat for the other side. After this, attach the hinges to the big board and add a finishing touch to the project.
3. How To Make A Stove Top Cover
The materials needed for making this include a big board, miter saw, clamps, hinges, and yet.
Gather all 4 pieces for the board and glue them together. Attach the two side pieces which elevate the board a little bit from the ground level. Smudge the board with paint and you have your stock top cover.
4. DIY Stove Cover
To create this amazing stove cover, you’ll need lumber, countersink, screw handles, saw, and drill. Cut and sand all the lumber needed. Lay the lumber together and drill the countersink hole on them. Assemble the parts and attach the countersink.
5. How To Build A Noodle Board
The materials needed to build this noodle board include boards (of different sizes), grit sandpaper, wood glue, nail gun, and pin. Glue the boards for the base together edge to edge, clamp them down and allow them to dry. Once the board is dried, and the side pieces and make it a little sloppy. Attach the side pieces to the board and stain/paint everything.
6. DIY Noodle Board
This is made from scrap wood, a nail gun, and wood glue. Start by measuring the size of your stovetop. Use the measurement to cut the dimension of wood to cut. Sand the wood down and glue them together then secure the side pieces on it with a nail and a nail gun. Sand the board again and paint it in your desired color.
7. DIY Stove Cover
Lay the two side pieces of the board down then lay the board base pieces on top of it one after the other. Screw them together using a hand drill. Flip the board upside down and paint the whole board with stain, spray the board with mod podge. Print the design and fix it on the board.
8. How To Make A Stove Top Cover
Start by measuring the stovetop then cut the pieces according to the measurement. Gather the pieces and join them together with glue. Clamp them till they are dried and San to make the surface and edges smooth. The materials used are silicon brushes, wood, grit sander, and clamps.
9. DIY Easy Noodle Board
Gather the materials needed for the project and measure the stovetop. Join the board base pieces together with glue and allow them to dry. Attach the side pieces and sand the board to make everything smooth. It is made from wood, a hand sander, and glue.
10. DIY Noodle Board
This is made from a felt pad, miter saw orbital sander, air hose, wood glue, foam brushes, and a cordless drill. Start by cutting the board to size the stovetop then secure the side pieces on it with a nail. Sand the board properly and stain it. Then, secure the handle to the right location.
11. DIY Noodle Board Tutorial
The materials needle for these DIY projects is strip wood, hand sander, miter saw, and brand nail. Cut the wood to size and glue the board base together, allow it to dry, and attach the side pieces to it. It is very easy to make and it requires less time.
12. How To Build A Noodle Board
The materials used in making this stove top are grit sandpaper, pine for the handle, wood glue, and stain. Cut all the pieces needed and sand them properly. Assemble all the pieces and glue them together. Choose your desired color of stain and smudge the board.
13. How To Make A Stove Top Cover
Here’s another tutorial that shows you another unique approach to making a stove top cover. The making procedure is quite easy to follow, it starts off with measuring your stovetop, afterward, you will need to buy the wood and cut it to the appropriate size. The tutorial will show you the complete steps.
14. DIY Noodle Board of Directors
The materials needed for this project are board designs, giant popsicle sticks, handles, and hand sandpaper. Paint the board design and allow it to dry then sand the pieces and glue them together. Paint the side pieces as well and glue them to the board base pieces. Attach the handles and you have your noodle board.
15. How To Build A Noodle Board
The materials needed for this noodle board are a hand saw, palm sander, light stain, large board, screw, drill bits, and handles. Cut the large board to size the stovetop, drill holes on it to screw the side pieces in place then drill holes on the side pieces for the handle. Once the pieces are all together stain it with blue stain and add any other decoration you want on it.
16. Homemade Noodle Board
The materials needed for this include boards, pocket hole jig, saw, and pocket hole screws. Start by measuring the stovetop to get the dimension of the board base. Cut the board base pieces, the side pieces, and the back piece. Drill a decorative hole on the two side pieces then secure all the board together using the pocket hole screw.
17. DIY Farmhouse Noodle Board
This is made from pickets, a circular saw, and a nail gun. Gather as many picket boards as you can get then measure the stove top and use the measurement to layout the picket. Hold the pickets together with a cross board using a nail gun. Cut off the tips of the picket and stain the board.
18. DIY Stove Tray For $30
This is made from scrap wood, handles, won’t glue, and grit sandpaper. Measure the stovetop and use the measurement to cut the board base pieces. Glue the board base together and attach the side pieces to it with a nail gun. Secure the handle is on the side pieces and stain the board.
19. How To Make A Simple Stove Cover
Gather all the materials and the wood pieces needed for the project. Glue the board base pieces together and allow them to dry before attaching the side pieces to it with the hand drill. The materials needed are simple and not many; wood boards, wood glue, and hand drill.
20. DIY Noodle Board Tutorial
This noodle board is made from wood, miter saw drill, drill bits, and hand sandpaper. Cut the board base pieces and glue them together. Cut the side and back pieces, make notches at the bottom and the sides of the side pieces to enable it to fit properly. Decorate the side pieces and make holes on them which serve as the handle. Assemble the pieces and sand them to make them smooth.
21. DIY Wooden Stove Top Cover
This is made from hand drill, drill bits, woods, stain, and screw. Gather all the good pieces. Glue the board base pieces together and allow them to dry then glue the side, front and back pieces to it. Sand the board and make notches all around the surface of the board. Stein it and you’re good to go.
22. DIY Oven Cover
Cut and assemble the parts of the board; the board base, the two side pieces, the back piece, and the two handle-holder pieces. Glue the frame together and attach the handle holder on the side pieces. Sand the board with a hand sander and choose the paint of your desired color to paint.
23. DIY Stove Top Cover
Cut all the wood pieces needed for the board. Gather the pieces and drill holes on the two side pieces. Join the pieces together with Greg’s pocket joke jig and screw. Stain the board and attach the handles. It is made from pocket hole jig, screw, grit sandpaper, drill, and wood.
24. DIY Stove Cover Tray
This is made from a walnut rustic pallet, would glue, wood stain, scrap wood slats, and handles. Sand the rustic pallet to make it smooth as possible then glue the 3 rustic pallets together as the board base. Turn the board upside down and attach the pieces of sharp wood to it for additional reinforcement. Attach the handle and stain the board.
25. DIY Farmhouse Noodle Board
This is made from lumber, foam brush, grit sandpaper, handles, acrylic paint, and rags. Start by making the board then secure the side pieces to the board with a nail. Drill holes on the side pieces for the attachment of the handle and then sand everything. Paint the board with acrylic paint.
Here’s a bit of advice you should listen to. When sorting for the right wood to use, do not settle for less, make sure you are using a strong and durable wood that can stay fresh for a long time. Poor quality wood might look bad after using it for some time.
Thanks for stopping by, I hope this article has been helpful, if yes, kindly share across your social media platforms.