Here’s a fun DIY guide for lovers of pirates. Why buy a pirate hat when you can make one for yourself with a few materials? After days of research, we are happy to present you with 22 DIY Pirate Hat projects.
You can make these pirate hats from the comfort of your home and without having to spend much.
Table of Contents
1. How To Make A Pirate Hat
This pirate hat is made from a black sheet, white sheet, pencils, glue stick, and two-sided tape gun. A strip of the black sheet is cut to make the band of the hat. Use a pencil to trace out the shape of the actual hat from the black sheet and cut it out. Cut out the shape of the design from the white sheet and glue it to the front of the hat.
2. DIY Tricorn Pirate Hat
This tricorn pirate hat is made from foam. It is a very straightforward make. Draw the pattern of the hat on two sheets of paper stapled together. Make sure the measurement is accurate. Cut out the pattern.
Bring it out your foam and lay the pattern on it, trace the pattern on the foam, and cut. Glue the pieces together. Glue a wire gauge to the edges of the hat and paint it your desired color. Bend the hat to link more like a pirate and you're good to go.
3. Gothic Pirate Hat DIY
If you don't want much decoration on your pirate hat, then you need to try this gothic pirate hat. It is made from wool, yarn, scissors, needles, feathers, jeans, ribbon, and pin. Fold the edges of the wool head in three places and when you get your desired look, pin the threefold. Sew the fold and remove the pin. The pirate hat is ready.
But if you want to decorate this gothic pirate hat, sew the yarn around the tip of the head. Sew the fabric to the head and fold in the edge in three places as you do in the first one. Glue the feathers to the side of the hat and it is done.
4. How To Make A Newspaper Pirate Hat
This pirate hat is made from a piece of rectangular newspaper and scotch tape. It is kid-friendly and it takes less time to complete.
Fold the newspaper from top to bottom, then fold all the two upper corners of the newspaper down. Carve the brim of the hat from the bottom margin and pull the hat open.
5. 5 Ways To Make A Pirate Hat
This step by step guide shows you how to make a pirate hat with a newspaper. Fold the newspaper horizontally, fold the two upper corners down to give a sharp edge. Fold the bottom of the newspaper and secure the flaps around the corners. You can now decorate the hat if you like.
6. How To Make A Tricorn Pirate Hat
This is made from an already-made hat. It is made from hat, trim, ribbon, and pin. Attach a trim around the bottom brim of the hat with fabric glue. Turn up the brim and fasten it to the middle back with a needle and thread. Repeat this process for the other side of the hat and your hat is ready for use.
7. Pirate Hat DIY
The MaterIals needed for this DIY project are felt ( black, white, red), Faux fur fabric (optional), pirate hat pattern, skull and crossbones pattern, eyepatch pattern, and String, and Scissors
Trace the pattern of the hat on each of the felt materials and glue them together. Use the white gel material to carve the crossbones and attach it to the hat.
8. DIY Pirate Hat Pattern
The materials needed for this are making tape, leatherworking kit, edge grooves, hand cutter, and buckles. Trace out the pattern of the hat on a fusible interface. Using masking tape, attach the pattern to the leather and make holes all around it. Trim out the excess interface and leather. Hand-stitched a strip of leather around the edges of the hat.
9. How To Make A Pirate Hat
This pirate hat is made from an old hat. Spray paint the old hat inside and out and leave it to dry. After the paint has dried off, food the edges of the hat and you have your pirate hat ready for use. All that you need for this straightforward DIY pirate hat are an old hat, spray paint, and pins.
10. How To Make A Pirate Hat Out Of Paper
This is made only from paper. It is very easy and cheap to make. Trace the pattern of the hat on a sheet of paper and cut the pattern. Repeat this process to have two copies of the pattern. Glue both together with the double-sided tape of the gun. Draw the skull symbol on it and the work is done.
11. DIY Pirate Tricorn Hat
This tricorn hat is made from an old hat. The old hat was dyed to turn to the color black. After which the edges are folded in three places. Using a Dremel, 4 holes were drilled on the edges of the hat and a rope was passed inside it to hold the folding in place. It is this simple and fun-filled.
12. DIY Newspaper Hat
Like other pirate hats made from paper, this is made by folding the newspaper into two. Then, fold the two upper corners down. After which you can fold the brim from the bottom margin.
It is among the list of simple and funny pirates that you can try your hands on.
13. Best DIY Pirate Hat
This is made from the hot glue gun, chain, decorative button, sheer fabric, and black lining. Measuring the brim of the hat gives an accurate look. Food the sides of the hat and attach all the decorative materials to it. It is simple and affordable to set up.
14. Duct Tape Pirate Hat DIY
The materials needed for this DIY pirate hat include 2 rolls of black duct tape, 1 roll of grey duct tape, a door frame at least 18" wide, a marker or pen, and a Ruler.
Add strips of duct tape across the door frame to get an 18×18" wide tape, add another layer of black duct tape on it. Remove the tape and cut out a circle from it ( this will serve as the edges of the hat). Wrap the duct tape around a bowl facing down(this will serve as the crown ).
15. Quick DIY Pirate Hat
You're already late for your pirate party and you've not even got your hat ready.? Here is a simple and fast step to make a pirate hat for yourself.
Trace out a pattern of the hat you want, cut two pieces of this from a fabric. Trace and cut out this same pattern from a carton or cardboard. Use the pattern from the cardboard to line the fabric and glue everything together.
16. DIY Paper Pirate Hat
This is made from black sheets, white sheets, pencils, staple guns, and scissors. Draw and cut out two pieces of the fat pattern. Make a long strip for the band and glue it to the hat pattern. Carve the drawing of the skull and the crossbones with the white paper and glue it to the front of the hat.
17. How To Make A Pirate Hat With Paper And Fabric
This is made of fabric and paper. The hat crown is made by gluing pieces of newspaper to a cardboard sheet. Then, strip the edges of the crown and glue it to a large circle that will make the edge of the hat. Glue a piece of fabric around thus and bend the sides.
18. DIY Felt Pirate Hat
This DIY is a simple and child -lovely felt hat. After cutting out the felt hat. Sew together the pieces and draw the crossbones in front of the felt hat and your pirate hat is ready. This DIY pirate hat has little to no cost of production. It is made from felt material, a needle, thread, and pencil.
19. How To Make A Foam Pirate Hat
To make this foam pirate hat, you need a sheet of black foam, a white foam, and elastic. Cut out the hat on the black foam, draw and cut out the crossbones on the white foam and attach the crossbones to the hat and fit the elastic to the hat.
20. DIY Jack Sparrow Hat
The jack sparrow hat is made by bending the edges of the hat straight ( the same level as the hat). Bend the other side the same way and roll the back. Though there is a little modification to this hat, it is still very simple And beautiful. Make sure you check the hat very well if you're buying an already-made hat for this because some of it might need adjustment.
21. How To Tie A Pirate Head Scarf
Have you been looking around for how to tie a pirate scarf? Here is a guide for you. All you need is a 20×20" square piece of cotton material. Hold the material on two opposite sides and let the corner between the two sides fall over to form a small triangle.
The remaining materials will have to form something like a bigger triangle. Put your head on the small triangle and flip the remaining piece of clothing backward, smooth it out, and use the tails made by the small triangle to knot a square tie on top of the bigger triangle on your head.
22. Origami Pirate Hat DIY
The materials needed for this simple project are a sheet of black paper, white paper, pencil, scissors, and a glue stick.
Fold the black paper into two halves, then fold again to quarter (to secure the middle line). Unfold the quarter and fold the two corners of the half down on the middle line. Fold up the bottom margin and glue it to both sides of the corner. Use the white paper to carve a symbol in the form of the hat.
Conclusion
Thanks to these DIY pirate hat ideas, your kids can have fun playing pirate-captain with friends. Some of the projects listed might require you to spend a little, while others can be made using items that can be found in your home.
That’s a wrap! I hope this article has been helpful to you. Feel free to share your thoughts on this article in the comments section below.
Ask Me Anything