One thing that makes PVC pipes so fantastic and extraordinary is that they are flexible. I mean they can be shaped into anything. This flexibility takes up a new level when it comes to DIY.
A DIY PVC pipe garden! That just sounds so awesome. I know you will be curious as to what type of garden I'm talking about. Don’t worry! I have 20 different plans on how to make a garden from PVC pipe.
Table of Contents
1. DIY Vertical PVC Garden
Many predators tend to hinder the growth of nursery plants. This vertical PVC garden can help you protect your nursery plants. It's a vertical garden, therefore you don't need many materials. All you need are PVC pipes and their covers.
The steps involved are very minimal and simple; Cut around the PVC pipe and melt the edges of the cut. Get a raid tin and push it through the cut, hold it with an elastic band. This is to open up the cut very well.
Once the cut is open, remove the raid tin and disassemble it to make a metal sheet. Fold the metal and fill it with soil.
2. Portable Vertical PVC Garden
The first step to make this axing PVC pipe garden is to gather the materials, which include PVC tubes, plastic bottles, paper tape, tape measure, utility knife, saw, drilling machine, bolt, and screw.
Once the materials are ready, mask the tube at 20 and 40cm with paper tape. Cut through the tape to make two holes in the middle of the tube. Prepare the holes by heating and push the heated zone inward to create two apertures.
3. DIY PVC Planter
Another axing DIY is this PVC pipe garden. It is made from PVC pipes, end caps, brass hooks, watercolor, and emulsion paint. The watercolor and the emulsion paint give the garden a colorful look and class.
4. PVC Hydroponics Unit DIY
There are numerous advantages to having this PVC pipe garden. One of them is that there is complete control on the nutrients absorbed by the plant and due to this, the plant experiences less stress.
The zig-zag shape of the garden makes it exceptional. To get this shape, you need to be very careful with the arrangement of the PVC bits. Once you cut the pipes, arrange them and connect each to the corner pieces and end cap.
5. DIY Gardening Idea With PVC Pipes
The materials needed for this PVC pipe garden include 4 inches PVC pipe, ½" PVC pipe, cocopeat, vermicompost, soil, and water. Here is how to turn all the materials into an amazing PVC pipe garden:
Drill planting holes on the 4" PVC pipes, make sure the space between the holes is even to have a great row. Then, cut the ½" PVC to length and make irrigation holes on it. Cover it with a weed block and push it through the 4" pipe. Fill the pipe with soil and start planting.
6. DIY PVC Pipe Garden
This is among the simplest methods of making a PVC garden. All you need is a PVC pipe. Drill planting holes around the PVC pipe. After that, through the planting holes, drill another hole on the other side of the pipe but smaller than the planting holes.
Dig the floor of where you want to install the garden. Place the pipe on the floor with the planting hole facing up and the other hole inside the soil.
7. DIY Hydroponics System Using PVC Pipes
The materials needed for this hydroponic system include PVC pipe, PVC end caps, PVC glue, tape measure, Sharpie, and saw. It's very simple to set up and cheap.
8. How To Make A PVC Pipe Herb Garden
This wall-hung PVC pipe garden is mostly used for growing herbs. It is very cute and functional.
In this video, the instructor gives the step-by-step procedure on how to make one for yourself.
9. DIY Vertical Tube Planter
In making holes into the tower tube for this PVC garden, always ensure that the holes are on the sides that will get adequate sunlight. Cover the bottom of the tube with an end cap and fill it with soil. Then, you can start planting.
10. How To Make A Vertical Garden From PVC Pipe
Measure and cut a long PVC tube with a reciprocating saw. Lay the PVC tube on the cutting table and drill planting holes on it. Then, Smith the edges of the jokes with a metal file. For proper irrigation, drill irrigation holes around the ¾" tube with a 3/16" drill bit. Wrap a weed block around the tube and secure it tightly with zip ties.
11. DIY PVC Pipe Planter
Get a 150mm PVC pipe and make planting holes on it. After this get a smaller pipe and drill drainage holes all over it. Wrap it with a weed block and secure it with zip ties. After this, position the drainage tube inside the larger holes and. Then, fill the large tube with soil and you're good to go.
12. DIY PVC Pipe Garden
What are your definitions of craft? For me, this is the perfect definition of craft. It is superb! Apart from being a garden, it can be used to decorate houses. The first step you need to take before this can be yours is to prepare the planter for the vertical PVC garden. This is made from a piece of wood.
13. PVC Pipe Garden DIY
Here are the steps involved in making this PVC garden: Get a bowl and drill holes at the bottom. Cover the holes with masking tape. Put the PVC pipe into the bowl and fill it with stones. Mix white cement and pour it inside to seal the pipe in place. Frill small holes across both sides. Push strips of wood through the holes.
14. How To Make A Vertical Garden Using PVC Garden
This vertical PVC pipe garden is made from PVC pipes, end caps, and strings. Cut the PVC pipe to your desired length and make holes in it. Fill the pipes with soil and cover both openings with PVC end caps. Then, hang them with the strings.
15. How To Make PVC Pipe Gardening Planter
This PVC pipe garden planter is made from a single PVC pipe, a plastic bottle, and a bowl. Cut the PVC pipe to your desired length and paint it. Cut the bottom of the plastic bottle and paint it as well. Rest this for the bowl. Then, fill the bottle and bowl with soil. Plant in them. Drive the PVC pipe into the soil in the bowl and place the bottle on it.
16. How To Make A Vertical Garden From PVC Pipe
Measure and mark the middle of the PVC pipe with a Sharpie. After this, measure 7 cm on a sheet of cardboard, use this to mark across the middle line for the planting holes. Cut the marked areas and heat the edges to curve them inward. The PVC pipe used is recycled.
17. DIY Tomato Cage With PVC Pipe
Unlike the actual tomato cage, this 3- D PVC tomato cage is spectacular. It is wide and sturdy. Always measure and mark the PVC with Sharpie before cutting, and don't use an electric saw because the PVC tends to break easily when using it.
Start cutting with corners and centerpieces. After this, prepare the grid stable and drive them 10" into the ground.
18. DIY Hanging PVC Garden
Hanging PVC is always cool! It doesn't require so much in terms of time, energy and materials. All you need to do is to get PVC pipes and it's accessories. Drill planting holes at intervals on the pipes, sand the holes to make them smooth, and paint them. After this attach each pipe to the hooks and you're good to go.
19. DIY Hanging Garden System With PVC Pipe
This hanging PVC pipe garden is extraordinary. It is different from others because it is modular and customizable, it is cheap, portable, and can be carried from one place to another. Cut the PVC pipes into the desired length and make holes on them for plant support.
20. DIY PVC Pipe Planter
You don't need so many materials and tools to make this. All you need are PVC pipes, accessories, a drill, and a cutting tool (hacksaw or reciprocating saw). Cut spacers on the PVC tube for the tees and 90-degree elbow.
Conclusion
PVC pipes are easy to get, they are cheap and more useful in many areas of DIY. What are you waiting for? Get the required tools and start making an amazing PVC pipe garden for your home. Feel free to use the comment section below if you have any questions or contributions related to this article.
