Truck beds are vulnerable to damage since they get a fair share of dents and dings due to their array of uses. As a result, you’ll need to conduct repairs to ensure your truck bed works efficiently.
However, catering to your truck bed is tedious since you’ll have to detach it entirely to repair it. Since we understand how frustrating and tiresome the operation is, we compiled a few easy steps to remove a truck bed, making it hassle-free for you.
Keep reading to find out more about these practical yet straightforward steps you can incorporate during this process.
Table of Contents
How To Remove a Pickup’s Truck Bed
Pickups are used for various purposes that make them susceptible to damages. Here’s how to remove a pickup truck bed:
Step 1. Prepare your Truck
It’s best to prepare your truck for the removal process. Park the vehicle in an ample space that allows you to move around now and then. Once you have found the perfect place for your truck, turn off the engine.
Step 2. Gather All Your Tools
Since you’ll need various tools to remove the truck bed successfully, it’s best to gather them all before unmounting the truck bed.
Removing a truck bed from a vehicle is not an easy step—it needs preparation. Here’s what you’ll need for the process:
- Screwdrivers
- Jack stands
- Impact wrench
- Ratchet straps or ropes
- Long car jacks
- Pieces of wood logs
- Crane
- Scaffolding pipes
- Small hydraulic jacks
- Sawhorses
Take this process with seriousness and utmost care. It’s advisable to wear gloves to protect your hands and safety sunglasses to protect your eyes.
Also, this process needs strength and willpower. Ensure you are well-fed and hydrated before carrying out this activity.
Step 3. Raise the truck using a Jack or Sturdy Stands
Proceed to place jacks at each side of the Pickup truck to support your vehicle. That way, the pickup truck will be held up, allowing you to easily access underneath the car while unraveling the bolts and nuts.
Step 4. Slowly remove the Rear bumpers of your Pickup’s truck bed
Begin by removing the rear bumpers. To remove the bumpers, you need to unravel bed bolts that hold the truck bed together. Each Pickup differs in the number of bed bolts. While others have four bolts, others have eight, and so you need to inspect your truck. Once you know the number of bolts in the bumpers, start unraveling them.
One of the best things you can do to ensure you complete this step is to observe how your truck looks. Explore until you find what you are looking for.
Once you loosen the bolts to get rid of the bumper, unravel the bolts that hold the hitch.
Note: To avoid any accidents, you need to be careful with this step since the hitch is heavy.
Step 5. Unclip the light wiring
You need to disconnect light wirings that connect the truck bed to the Pickup truck.
Unclipping these wires is necessary since it makes it easy to remove the truck bed.
Locate the taillights and unravel them by removing the bolts. Open the gas cap and untighten the bolts found at the neck of the gas tank. This ensures the gas tank is not attached to the bed anymore.
While some wirings can be hard to pull, you need to try as hard as you can until you get the hang of it!
Step 6. Make a scaffold on the ground
Scaffolding is an essential step while removing the truck bed since it will make the whole process hassle-free; you won’t have to lift the truck bed on your own using bare hands.
Build an 8x8 scaffold on the ground using metal pipes to place the truck’s body.
Step 7. Put the Truck’s Body on the scaffold
Get in the truck and face backward to ensure you get the job done accurately. This step needs utmost care; ensure you place your car correctly because if not, you’ll have to build the scaffold once again until you get it right.
Step 8. Use a rope to tie the truck to the scaffold
You need to use a sturdy rope to tie the truck bed to the scaffold. You’ll find four tie-downs beneath your truck bed.
Tie one end to your truck bed’s floor and the other end in the metal of the scaffold you built. Ensure you tie it tightly, so it doesn’t move.
Step 9. Pull the truck bed out
Lastly, you need to get in the truck and move it from the scaffold you built. Carry out this step carefully, and eventually, you’ll feel the truck bed coming out of your Pickup truck.
Also, to ensure you are doing the right thing, each time you move away from the truck bed, get out of your truck to check if there’s any progress. At times, perhaps there’s something you might have forgotten to unravel, and it’s not allowing you to move.
On the other hand, if there’s progress, keep moving forward until you remove the truck bed entirely.
Safety Precautions To Take When Removing The Truck Bed On Your Own
Without a doubt, removing the truck bed on your own is not an easy process. You need to take various precautions to ensure you are safe throughout the task. These are:
- Use Jacks or sturdy stands to lift your truck when you need to crawl beneath the truck bed to disconnect wirings and loosen bolts.
- Wear eye protection to ensure your eyes aren’t harmed during the process.
- Ensure all the electrical components of the vehicle are completely switched off.
- Turn off the engine before trying to remove the truck bed.
- Keep a fire extinguisher near you in case of any emergencies.
- Don’t leave your tools on the battery since they can create a spark, leading to an explosion.
Conclusion
We highlighted a simple way to remove your pickup’s truck bed. Lifting the truck bed with bare hands is entirely unnecessary and exhausting. Instead, utilize our detailed guide to remove the truck bed successfully.
Ask Me Anything