Do you have a defective dog? As sad as it could be, there’s a solution to the problem. You can put a smile on your dog’s face by building a wheelchair. With the help of this wheelchair, your dog will be able to move from place to place.
There’s a quicker way to provide a wheelchair for your dog, you can go to a vet and have them make one for your canine buddy, however, you would have to spend a lot of money. Making one yourself isn’t as hard as it seems and it won’t cost you too much to build.
In this article, I have put together a list of 12 DIY Dog Wheelchair projects that you can make from the comfort of your home. Go through our list and determine which wheelchair is best for your dog and start building.
Table of Contents
1. DIY French Bulldog PVC Dog Wheelchair
You can use this only on a french bulldog, and the reason is because of the way it is designed for one. The floor’s size and height to the bulldog’s hip give the dog the perfect balance to move freely.
It’s a simple dog wheelchair to make if you have the right tools available. You need lawn mower wheels, nuts/bolts for the axle, T and L connectors, PVC pipe caps, and one piece of PVC pipes with their various dimensions.
2. DIY Dog Wheelchair
This is an excellent dog wheelchair that comes in two sizes; the bigger size comes with various parts that will enable it to be printed on smaller printers. Here are the tools and materials needed for this project.
A 3D printer specifically for the 3D printed parts, tube connectors, wheels with a diameter of 250mm, an axle to connect the wheels, and aluminum tubes.
First of all, you start by printing the attached files then, work your way to assembling all the parts as mentioned earlier together.
3. How To Make A Dog Wheelchair
With this guide, you can make this dog wheelchair to support your dog’s overall movement, whether he/she is paralyzed or was born that way. You have to consider the dog’s height to know how high the back height of the wheelchair is from the floor to the hip of the dog.
Here are a few things that you need, you need a saw, wheels, pipe connectors, pipe, and pipe glue. There are three significant steps that you will go through to make this fantastic dog wheel.
4. DIY Quad Dog Wheelchair
Here is a cool quad dog wheelchair that runs on four wheels. It’s fast and very functional. You need a few supplies to make this for your dog.
Get some aluminum pipes, four-wheel, screws, nuts, eight plastic buckles, rubber caps, ad pads. The first step starts with making an illustration on paper. This will be your guiding tool for how the dog wheelchair will look like.
5. DIY Dog Wheelchair For Large Dogs
Do you have a monster dog then, you should consider learning this process; it will help you make that excellent dog wheel that will fit your monster dog’s size.
The first thing to do is measure your dog’s size and then use it to cut out pieces of the PVC pipes you will be using. The next item to cut is the iron rod that will be connected to the axle. Then, your wheel is up next. Before you mount the wheels, you must have assembled the pipes, piece-by-piece and then set them in your wheel and try it on your dog. The upside to this project is that you can do it for just $15; it’s pretty cheap.
6. DIY Dog Wheelchair Back Legs
The only place you can use this is at the back legs of your dog, it is portable, and your dog can move about freely without getting tired. The great thing about this wheelchair is that a strap will hold the dog’s back legs at the center so that the legs won’t be wobbling on the floor as he/she moves.
You will be using PVC pipes, PVC T and L connectors, PVC glue, AC foam tube, balancing wheel for bicycle, nylon strap, cotton rope, bolts, nuts, and washers.
You will start with measuring the PVC pipes and cutting them out to your desired length. Then, assemble the pipes and wheel to form your wheelchair.
7. DIY Dog Wheelchair Front Legs
This can only apply to the front legs of your disabled dog. It’s relatively small but efficient enough. You’re going to start this process by measuring the chest of the dog all around. Here are the essential tools you need to start with getting the printed items: your frame, fork, fork shim, and rim.
For the non-printed items, you are looking at some nuts, a metal loop, a flat Phillips machine screw, and a pan head machine. The rest of the steps involve assembling the cart to fit into the dog’s front legs.
8. How To Make A Dog Wheelchair
One of the beautiful benefits of this fantastic dog wheelchair is that it’s way cheaper than buying one at a store. This is a good deal if you want something on a low-budget. Here are the necessary parts you need to acquire. First, get a PVC pipe, PVC elbows, standard Ts, furniture dolly wheels, epoxy adhesive, and ace bandages. The process doesn’t require heavy equipment.
9. DIY Dog Wheelchair For Dachshund
Dachshund is a very peculiar dog; that is why you need a peculiar wheel to go with it. This dog is relatively short, so have in mind that the wheelchair will be quite low.
You need leg rings, front harness, stirrups, width connectors, single, and double cramps. Now here is how to set up; the wheelchair will come folded flat, loosen the nubs, move the strut, and every other piece.
The process won’t take long at all. The only downside of this guide is that you won’t learn how to build it from scratch. You will need to buy a new wheelchair and install it.
10. DIY Low Budget Dog Wheelchair
This will help you if you are on a low-budget; it’s cheap yet very functional and durable. You can use it for a very long time without having any issues. With $25 you can make this with ease.
Here is what you need for this project, two lawnmower wheels, a threaded rod, locknuts, PVC piping, four elbows and T connectors, PVC cement, and a hacksaw.
The first thing to start with is assembling the PVC pipes, use the cement to connect the PVC pipes elbows and Ts properly. You will also need duct tape to tape one side of the pipe to the other and create some sort of flat bottom for the disabled legs.
11. Simple DIY Dog Wheelchair
Nothing is complicated about this dog wheel; it is effortless and super easy to make; you can make it in several colors. The wheelchair is made of wood, and you can spray it to give it a beautiful look.
You need a strap to strap the dog disabled legs to the back of the wheel. This wheelchair is suitable for dogs with bad back legs. It won’t work for you if your dog’s bad leg is in front. Use your drill to drill holes on the wood and assemble all the wood pieces.
This process is very straightforward and can be done by anyone, even a beginner with no carpentry knowledge.
12. How To Make A Wheelchair For Dog
Do you want to learn how to make a wheelchair for your dog? Then, you need this guide to support your ideas. The materials you need are easy to find and affordable to purchase at any store, or you can just have them lying around in your house.
You need cardboard and a PVC pipe; this looks like an odd combo, but it works. Once you have the cardboard cut and set up on the floor with the PVC pipe, measure the dog’s hips and cut out the pipes to fit. You will also need some PVC elbow connectors. This wheelchair is also quite wide in the overall size.
Most of the measurements in the DIY guides are for specific dogs. Make sure you measure your dog before building a wheelchair for him or her. A wrong measurement could result in your dog being uncomfortable. The wheelchair should be very comfortable while on the dog.
Feel free to share your views or questions in the comment section below. Don’t forget to share this article with your friends if it has been helpful to you.
Ask Me Anything