This article is for people who are looking at making a DIY TV mount from home at a low cost. If regular TV mounts seem expensive, you should check out these DIY ones.
Since the world transitioned from using black and white big TV to using a flat wall plasma TV, there is a high demand for a TV mount and the price is also rising. That's why I gathered these 17 DIY TV mounts at a lower cost for you to create and enjoy.
1. DIY Modern TV Stand Console
The first DIY I'm going to talk about is a modern TV stand made from a wooden shield, furniture panel, MDF white gloss door, screw, lift hinges, and many more.
Drill 4 4mm holes on the edge of one wooden shield, enlarge the hole to 7mm to allow the screw to form in it properly. With this Process, screw three horizontal wooden shields to the long Shield. Fix the upper shield. Assemble the MDF four and attach it to the shield. Your Mount is ready for use.
2. How To Make A Mid Century Modern TV Stand
This Mid Century Modern TV stand is very complicated yet simple. The design looks a bit complicated but the actual work of building it is very simple. It is made from a plywood board, circular saw, drill, and hairpin.
Cut out the long upper and lower shield of the stand, cut the side pieces and the inner pieces. Assemble all the pieces and screw each to the necessary place. You can paint or coat the shelf since it is modern, you don't want to miss out on that modern look.
3. Easy TV Stand DIY
The material needed to build this include galvanized pipe, galvanized floor flange, wooden board, red, stain, and polyurethane. Start by measuring the wooden board required for the project and cut them out.
Screw a long wooden piece on top of two side pieces, Measure and mark the middle of the board where the third side piece will be attached to. Screw another long rectangular piece on top of the side pieces to cover them completely. Flip the shields over and repeat the process with 2 long rectangular pieces. Polish the shield and place your TV on it.
4. Rustic TV Stand
This is made from table saw, miter saw, wood claims, drill, glue, polyurethane, pocket hole jig, and tape measure.
Measurements are very essential when building a TV mount for proper placement of the TV. Cut 3 long 2×6 boards, drill holes of 6" on one of the pieces. For the three boards together with 1.5". Screw, glue it, and make it stand firmly. Build the shelves and assemble the legs. Sand every edge of the wooden boards.
5. PVC Pipe TV Stand
This PVC pipe TV stand is very simple and easy to build. It is made from PVC pipes, 4 T-connectors, 2 90degreese elbows, and 4 couplings. Cut the pipes with a miter saw or any other hand wood saw you can get. Gather the pieces, assemble the feet first, then the legs, the lower cross member, upper legs, and the upper cross member. Make sure you test the stand to ensure it does wobble or prone to slumping.
6. $30 DIY TV Console
This DIY TV console is very cheap to set up. It is made from Caitlin as the legs and wooden shield as the shelve, dowel to make holes and drill.
Glue 2 pieces of wooden shield together for the upper and lower parts of the shelve. Screw the side pieces and middle piece to the lower shield, flip upside down, and fit in the upper shield as well. It is very straightforward and cheap to set up.
7. DIY TV Stand Design For $4
This is the cheapest DIY TV mount on my list. It is made from wood, screw, and sanding machines. Cut out the pieces of food needed according to the size. assemble entering together and screw each at the appropriate place. At the end of the project, you will have a two step-like shelf. As it is very cheap, it is also very simple and beautiful to set up.
8. DIY Cardboard TV Stand
This amazing DIY cardboard TV stand used cardboard sheets, a furniture panel, foil paper, cello tape, and a tape gun.
Use the cardboard to build two drawers for the shelf and attach a sheet of furniture panel to the face of the drawer for decoration. Build two table shields from the cardboard, decorate it with a black tape gun and then assemble the two with cello tape. Insert the drawer in the space beneath the shields and your TV mount is ready for use.
9. DIY TV Console
This DIY TV console is very simple and fast to create. It is made from a screw, wooden board, glue, and drill.
Gather the materials and cut 3 long pieces of a wooden board, cut out the leg and the cross members. Assemble everything in the form of a table and screw it together. Add glue to it to hold it firmly. You can put flowers or other materials you like in the space between the 3 boards.
10. Knex TV Stand
Are you looking for a strong TV mount that can accommodate all your TV gadgets? This Knex TV stand is for you. Assemble the materials and screw the pieces together. Each shelf can hold up to 50 pounds. It is designed in a way that makes it durable and strong.
11. Floating Concrete TV Stand DIY
The materials needed to build this amazing DIY are a Powered drill, screwdriver, caulking gun, sanding machine, Shovel, Mitre saw and Hammer. Design the framework of the project on a sheet of paper. Create the mold and pour in the concrete. Remove the mold and give it a finishing touch. It is thus simple to create, try it out. This DIY TV mount would last for years in your home without needing a replacement.
12. DIY TV Mount
The materials needed to build this beautiful DIY TV might include a wood board, glue, frill, and screw.
Drill 3 ¾" holes on each shelf, screw the pocket hole in one of the shelves that make the left side of the frame. Assemble the right side of the frame. Drill 3 holes on the top support, place the top support between the two sides. Fit the trim and fit the top and bottom aprons. I would recommend building this for modern houses. The making process might take a lot of time to finish, but it would be worth it in the end.
13. DIY Floating TV Wall Unit
The materials needed for this beautiful DIY TV mount include MDF board, screw, drill, dowel, and saw.
Mark out a rectangular space on the MDF board and drill for holes on each edge of the marked space. Cut the holes, leaving a rectangular hole on the MDF board for the attachment of the TV. Attach 2 strips of wood to the tip of the rectangular hole to secure it firmly. Build support for the MDF board.
14. DIY TV Wall Mount
If you are on a budget, try out this DIY TV mount. The whole design is put together for as low as $15.
It is made from the drill, angle iron, screw, washer, and 2 hooks.
since the TV already has a screw at the back of it, attach an angle iron to it using screws and washers. Attach the hooks to both sides of the angle it in and mount it on the wall. The process is very simple despite the low cost.
15. How To Wall Mount A TV
Building a TV mount is one thing, mounting it is another thing entirely. For the newbies, here is a guide that will show you how to wall mount a TV. The guide is super easy to follow and requires no skill whatsoever. I would highly recommend checking this tutorial out.
There you have it, an epic list of the best DIY TV mount plans that you can make for your television. As a bonus, we also included some DIY TV stands, not everyone loves wall mounts, a TV stand is a great way to mount a TV without having to make holes on your wall.
If this article has been helpful to you, please share it with friends and family.