DIYs are a great project or challenge to try on because there are many benefits you can derive from making anything DIY. You have the opportunity to learn something while building something for yourself, also it saves you the cost of buying some things from the store at a higher price.
We covered DIY studio desk plans in this article. Here, you will find some of the most beautiful studio desk plans that you can make.
Table of Contents
1. DIY Cheap Studio Desk
Start by measuring all the components that will be mounted on the desk. Then, screw two rails to the wall and just some inches down the rail screw rail support into the rail. After this, mount the wooden board on the support. Add the finishing touch to the table and place all the components on the board. The materials needed for this DIY studio desk include wood, screws, miter saw, grit sandpaper, glue, tape measure, and hacksaw.
2. Reclaimed Wood DIY Studio Desk
This is made from flange fittings, Tee fittings, casters, gator tubbings, woods, and sandpaper. In this project, a barn door is used for the tabletop and a barn door is from cedar which is softwood, but you can use any type of wood for your own project.
Start by getting a reclaimed wooden board for the tabletop then sand the board. If there is any gal or loop on the board it is advisable you disassemble the table and join them together tightly. Then, get hold of plywood and screw it to the bottom of the table too as support.
3. DIY Studio Desk Build Under $350
First draft the structure of the desk on a sheet of paper with proper dimension then go-ahead to map out the structure on a piece of plywood. Cut the plywood to shape and use this plywood to shape the other three plywood. Now we have four corner pieces for the legs that also stand as shelves. Assemble the pieces and make the shelves for both sides then move forward and prepare the tabletop. Once the tabletop is done, attach it to the shelves.
The material needed for this DIY studio desk includes wood, miter saw tape measure, pencil, paper, wood stain, screw, and jig.
4. DIY Music Studio Desk
This music studio desk is made from an already drafted and concise plan. This plan serves as the basis for the project and makes everything easier and faster. You can download the plan from the description box of this video. Once you download your plan you're halfway there.
Start by cutting the pieces for the base then the pieces for the legs. Prep the pieces and assemble them, secure them with screens, and add a finishing touch of your choice to it.
5. DIY Studio Desk Build
In making this DIY studio desk, start by building the frame for the tabletop. Cut the pieces and join them together into a compartment. Then attach the armrest and other components of the desk to it. Then, assemble the legs and paint them in black then attach the desktop to it.
This project is very simple and cheap to make, it is made from wood, wood glue, hacksaw, miter saw, take measure, sandpaper, and wood stain.
6. Ultimate Home DIY Studio Desk
Start making a plan for the desk using SketchUp. Then, start with the woodwork, cut and join the pieces of wood together for the keyboard tray and other components. Once the frame is ready, assemble the legs and attach them. In this project, each of the components of the studio has its own space that why the frame has a different section.
7. How To Build A Studio Desk
This is a customized desk. In making this, you first have to picture what you want to build. This will guide you on what to get and what not to get. Once you know what you want, go to the store and pick up the materials needed.
Start by getting a very nice and cool wallpaper, get a desk and add a speaker stand. You should get a monitor shelf, keyboard pad, mouse pad, and other essential materials. After getting all the materials, assemble them and place the hardware on them and you have your studio ready.
8. DIY Studio Desk Plans
This studio desk is a little bit complex but once the plan is drawn it becomes as simple as every other desk. Make the plan with Google Sketchup. Cut all the pieces needed for this and properly and carefully stain every piece. Once the stain is dried, assemble them and start placing the hardware at appropriate places.
9. Homemade Studio Desk DIY
This desk is very simple to set up since it is only made up of two shelves and a tabletop. Cut the pieces for the shelves and start building. Join the base and the two side pieces of the shelf then attach the middle piece that divides the shelf. Repeat this for the other shelf and place them at a measured interval then cover them with the tabletop. Stain the whole desk and you have your work done.
10. DIY Music Studio Desk
Measure and cut the piece for the desk side then use this as the template to cut the other side. Then, cut the front side of the desk and then cut the desktop. Frame the desktop by gluing four strips of wood to the edges. This is made from wood, wood glue, miter saw, handsaw, wood stain, and sandpaper.
11. Cheap Studio Desk Build DIY
This is made from lumber, pocket hole jig, pocket home screw, close, and glue. Measure and mark out where the pocket screw will be and drill pocket holes to that area using a pocket hole jig. Screw holes on all of the pieces then glue them together with glue and then screw them tightly with the pre-drill holes. Assemble the legs and attach the desktop.
12. DIY Studio Desk From Pallet Wood
The materials needed for this DIY studio desk include a wood pallet, plywood, glue, screws, and drill. Disassemble the pallet and relive all the pickets in it. Cut a piece of plywood for the desktop then frame it by gluing four pickets to its edges then arrange the remaining pickets on the plywood to reinforce the desktop. Assemble the legs and attach the wooden board to it then paint or add any finishing touch to it.
13. DIY Studio Desk
Make use of the Sketchup model to modify the design of the desk you want. Cut the pieces of plywood sheet for the keyboard tray and sand down the piece then paint it in white. Cut the pieces for other components as well and paint them white.
For the legs, cut four pieces of plywood, add a thin layer of wood glue to one of the plywood and place another one on top, all over to dry then repeat for the other leg. Note that every other piece is a single layer except the legs and this is because of reinforcement.
14. DIY Steel Studio Table
Apart from the materials needed for this DIY project, a good skill in welding is required or the ability to work with metal.
Weld some metal bar into a square shape and attach three pieces of metal bars to it from the inside as the support, repeat this for the second leg. Measure your preferred length of the desk and place the legs at each side then weld two long pieces of metal bar to both sides of the legs at the top, this is the desktop frame. Inside the frame, weld some pieces of metal bars to it to make it full as a desktop then add the finishing touch to it.
15. DIY Studio Desk
The materials needed for this DIY studio desk include wood, hand saw, drill, router, sandpaper, miter saw, nail, hammer, and ruler.
Gather all the materials and start cutting the pieces for the tabletop. After the table tool moves to the side pieces for the desk and then the base and the shelf. Once all the pieces are ready, assemble them and secure them tightly with nails and a hammer. Yes, just like that you have your studio desk in a matter of hours.
Conclusion
These are the best DIY studio desk you can find, we have done our part by listing them, it’s now up to you to pick which one would fit perfectly in your home, office or wherever you want the studio desk. Thanks for stopping by.
Ask Me Anything