How about making a DIY propane tank holder? This article will show you everything. Welcome to this exciting DIY that will teach you how to make a propane tank holder effortlessly. This idea is pretty simple.
You can probably do this yourself without checking any guidelines at all, or it’ll be better to check out a few guides below and see the cheapest, easiest, and most effective way to make a propane tank holder today. Without further ado, here we go!
Table of Contents
1. Propane Tank Holder DIY
This video guide is a simple video of the creator making his version of a wooden propane tank holder. This holder is said to hold a bit of a green propane tank. If you have a propane tank as small as this, you should give this guide a try.
For any propane tank that comes in a larger size, this guide can’t help you unless you want to make a larger version of the smaller wooden holder. In addition, this propane tank holder can easily be hung on the wall so that you can easily replace the tank anytime you want.
2. DIY Propane Tank Mount
If you have a 5-pound propane tank, you should consider making this propane tank mount for it. It’s pretty easy to build; you’ll require a welding kit to weld the metal sheet parts to a holder. The creator also applied rubber inside the tank mount to prevent the propane tank from touching the metal sheet. This propane tank mount is super sturdy and robust, easy to mount any place you want.
3. DIY Propane Tank Holder For Truck
This might not be the most substantial and most sturdy propane tank holder on this list, but it sure holds the propane tank in one place. The creator used a Riv nut kit and a propane bracket. You can get these materials and tools on Amazon at a cheaper rate via the link in the description below the video. This tank can easily be set up at the back of a truck and strapped in safely.
4. DIY Vented Outdoor Propane Box
The creator of this video guide had large propane tanks that needed a holder. Of course, he would have to make something big and strong enough to carry the weight of the tanks, so he used some galvanized angle irons, some screws, a saw to cut the iron, lots of washers, bolts, nuts, and a few other supplies. Although, this propane tank holder was explicitly made for a large school bus with an underneath storage space.
5. How To Mount Propane Tank Bracket
The creator of this guide will be making a propane tank holder mount for his Jeep wrangler. If you own a car like this, and you use many propane tanks, you most likely need this holder for your vehicle. It’s pretty easy to build, it’s small, so the materials required won’t be much, and you can easily replace your propane tank anytime it gets exhausted, and you need a refill.
6. Custom 11lb Propane Tank Mounts
Here is a custom propane tank holder built to carry an 11-pound propane tank. This is a pretty big project, seeing that this is a pretty big tank. Fortunately, the creator made a holder that will carry the weight of not one but two 11-pound propane tanks. First, you'll use a few materials to create a holder and attach it to the back of your truck or your off-road mini camper. The making process is simple to follow but quite expensive.
7. Propane Tank Exterior Mount
The creator of this video guide was super creative; he uniquely made this propane tank holder. If you have a Honda Crv camper or any other Rv camper motor out there, you could quickly build an iron frame around the trailer and attach it to the back of the RV camper.
This frame is reasonable because it has a lock where you can access the tank, remove it, refill and replace it effortlessly. This propane tank mount is only meant for external places, and it’s super easy to build if you have the required materials and tools available.
8. How To Externally Mount A Propane Tank
Take a look at another exterior propane tank mount. It’s almost the same size as the last tank in the previous guide above, but slightly different holder design. The creator didn’t talk about the welding of the tank onto the holder and then to the vehicle.
He was focused on how you can attach the tank to the back of an SUV or a camper without welding or gluing it. Simply tie the tank to a laid-out frame courtesy of the vehicle the creator used.
9. DIY Mounting Propane Tank Under Van
How about mounting a propane tank under your vehicle? Sounds cool, right? Here we go! All you need for this project are drilling tools, washers, nuts, bolts, clamps, a hand saw for cutting metal, and a few other supplies. The creator of this guide is building a holder for a 12.2-pound propane tank.
10. DIY Van Door Propane Tank Mount
There are only three things to say about this propane tank mount guide. It’s super easy, pretty cheap, and the making process is simple to follow. First, it’s not a large propane tank, so what you’ll use to make the holder will be practical and durable; check the guide to learn more.
Conclusion
That’s all we have for today; I believe you have gotten the solution you came for, and I wish you all the best, do have a blast building your preferred propane tank holder now. Thanks for your time viewing this DIY. Till next time, bye.
Ask Me Anything