Do you have orioles in your area and you wish to build a feeder for them? Or do you just like the sight of watching a bird feed? If yes, join me in this guide as we examine 20 DIY Oriole feeder plans.
Orioles love oranges, so, in this compilation, you will see a lot of oriole feeders with oranges. Making one isn’t difficult and does not require too many tools. You’ll need only a few materials and tools to make one. Are you ready? Let’s begin.
Table of Contents
1. How To Make Easy Oriole Feeder
The main objective of building this oriole feeder is to determine whether it will attract oriole or not and yes it did attract oriole. So, you have to build one in your backyard as well. It is made from scraps of wood, some screws, and glue. The steps are simple and straightforward.
All you need to do is to turn a piece of wood into a peg then glue another 1×2 piece on it and secure It will screws. After this, screw orange to both sides of the 1×2 piece and you're good to go.
2. DIY Decorative Oriole Feeder
The materials required for this DIY oriole feeder include PVC bushing, PVC coupler, hammer, file, end plug, caulking gun, waterproof adhesive, and PVC pipe. Cut the PVC pipe at an angle and hammer it into the ground. Then, attach the coupler and get a teacup and a saucer. Glue the teacup to the saucer, then glue the end plug to the bottom of the saucer and attach it to the PVC pipe.
3. DIY Baltimore Oriole Feeder
This is made from one shower caddy, three pieces of the oblong container, and ten small round containers. After setting up the feeder, make sure you glue a strap of rope around the top edges of the round containers and at the center of the oblong containers to give the birds something to hold while feeding.
4. Simple DIY Oriole Feeder
This is a very simple oriole feeder project. It is made from a piece of wire, orange, and pizza hut box. Get a long and curved pole in your backyard, then wound to wire around it in such a way that the two ends of the wire are dropping down. After this, attach orange to one end and a pizza hut box containing grape jelly on the other.
5. DIY Easy Oriole Feeder
This does not require any tool or so many materials. The major materials used are bought from the store. Get some birdhouse and a tray for the birdhouses to sit on. Then paint everything and allow them to dry. After this, attach the birdhouses to the tray with glue and attach L brackets to each side of the tray, then hang it with rope.
6. DIY Oriole Bird Feeder
This simple oriole feeder can be set up in 15 minutes. The material used includes yarn, dowel, orange plastic bowl, hot glue gun, orange, and oriole jam. Cut six pieces of 30" yarn and lay them down and knit them in the middle. After this, spread the yarn evenly and glue the bowl on the knot. Then, gather the yarn above the plastic bowl and pour the jam on and the orange. Hang the feeder and watch as the oriole feeds beautifully.
7. How To Make A Tea Cup Bird Feeder
The required materials for this include teacup and saucer, ceramic glue, twine, birdseed, and bird feeder hanger. Pour some glue to one side of the saucer, hold the teacup by the handle and press the opposite side of the handle on the glue. Cut and lay 4 pieces of twine and tie it in the middle. After this, glue the knot to the saucer and gather the twine above the saucer to hang the feeder.
8. DIY Orange Feeder For Oriole
To make this, get an orange and cut it into two and push a stick through the center of the half orange. Take the stick to a strong branch tree and tie it to it with a cord.
9. DIY Oriole Feeder
This is a very amazing Orioles feeder with the orange post. It is made from wood and screws. Assemble the cabin with two holes for the feeding bowls then attach the orange to both sides of the cabin with screws.
10. How To Make An Oriole Bird Feeder
The required materials to build this include wood, wood screws, drill, and saw. Cut the wood into pieces then assemble the feeding cabin. Lay down the back piece and attach the two short side pieces to it, then, attach the roof. Once the cabin is done. Take it out in the backyard and screw it to the tree, then attach orange to it to attract oriole.
11. DIY Oriole Feeder From Baling Wire And Deli Cup
This is made from a deli cup, drill, pliers, and grape jelly. It is super simple and inexpensive. Drill holes around the bottom of the deli cup to allow water to trickle down the jelly.
12. DIY Oriole Feeder
This is made from balling wire and plastic food containers. Clean the food container, drill holes to its sides, then fill it with birdseed and hang it on the tree with the balling wire. It is a very simple DIY oriole feeder you can see out there. Try it out today and see how beautifully the birds eat.
13. DIY Bird Feeder Plans
Cut and assemble the pieces for the feeding cabin. Then, line the base of the cabin with a wire mesh screen to keep the cabin as dry as possible and keep the birdseed fresh always. The materials used to build this DIY bird feeder include pieces of wood, a wire mesh screen, pleco glass, and glue.
14. How To Make An Oriole Feeder
This is made from wood, screws, small containers, glue, orange, and jelly. Cut the pieces needed for the feeding cabin then make two holes on each side of the base piece that will hold the containers. Assemble the cabin and attach orange to both sides using screws.
15. How To Build A DIY Oriole Feeder
This is made from lids, wire, ribbon spools, grape jelly, and orange. Decorate the lid with ribbon and use a pre-cut wire to hang the lids. Fill some lids with jelly and some with orange.
16. Simple Modern Bird Feeder
The materials needed for this DIY modern bird feeder include terra cotta plant saucers, wooden dowel, wooden beads, glue, and cotton twine. Glue the wooden dowel to the bottom of the terracotta cotta plant saucer, then tie the cotton twine into 12 macrame knots. After this, fill the saucer with birdseed and place it inside the macrame knot. Then hang it and watch as the birds devour their nice meal.
17. DIY Simple Oriole Feeder
This is A super simple oriole feeder. It is made from simple and inexpensive materials. The materials include a small plastic container, acrylic paint, paintbrush, jar, and large bowl.
Get a large bowl and fill the bottom with fine sand, then fill the bowl to the brim with water. Paint the container in orange color with two coats and allow it to dry. After this get a wire and wound it carefully to make a holder for the container.
Place the holder inside the water and place the container on it. Place the orange inside the container. Just like that, you have your bird feeder and water bath as well.
18. DIY Orange Bird Feeder
This is made from a peanut jar. Get a jar that has the same size and the lid then clean the jar. After this, take off the lid and drill holes around it, but there must be two homes close to each other in the center. Then cut the jar 1½" from the bottom. And you're good to go
19. DIY Oriole Feeder Idea
This DIY oriole feeder is made out of an old juice bottle. Cut a square on one side of the bottle, then attach half oranges to both sides of the bottle near the top. Hang the feed and our grape jelly into the square hole.
20. How To Make An Oriole Bird Feeder
This is made from a basket, wood stick, small container, flowers, scissors, wire hanger, sugar water hanger, and a hot glue gun. Attach the flowers to the basket with a sugar water hanger then glue the container inside the basket and fill it with some bird seeds. After this, attach orange to the sides of the basket.
I bet you must be satisfied with this article on DIY oriole feeder plans, this compilation is like no other you have seen before. We took the time to select the best projects that you can make from the comfort of your home. Fee free to go through our list again and choose your preferred project.