Are you having problems storing your liquor? Are the prices of buying liquor cabinets very high?
In this article, we looked around for some of the coolest DIY Liquor Cabinet Plans. This will help you minimize the expenses of getting a new one.
Table of Contents
1. DIY TV Cabinet Turned To Liquor Cabinet
In this tutorial you require paint, saw, wire mesh, led light, and screws.
Remove all the equipment's inside, add a wire mesh on the lower section, and put the remote-controlled led in the shelves to make it look spectacular.
Make sure to measure the size of the shelves using a liquor bottle.
2. DIY Vintage TV Conversion To a Liquor Cabinet
This is one of the easiest tutorials to deal with you require wood planks, saw, glue, hinges, paint, and plywood
Start by gutting the contents in the console, take it out, and dust it. Proceed to make well-measured shelves, paint them, add mirrors and LED. Attach the hinges on the door for easy opening.
3. DIY Conversion of a Wine Barrel into a Liquor Cabinet
In this DIY you require a hammer, hacksaw, pencil, hinges, screws, Sandpaper, plywood, and gasmask.
Sand the outside of the barrel then glue the metal bands into the barrel. Mark the door and cut out precisely, this is the tricky part.
Glue the door together, as it dries clean inner part of the barrel and begins making shelves and deciding the number of compartments you need.
Attach the doors with hinges and proceed to attach the shelves.
4. DIY Converting Jerry Can to Liquor Cabinet
This DIY suits petro heads who love liquor. The following tools and materials are needed; hinges, wood screw, rubber seal, 1cm of plywood, and windshield glue.
Begin by measuring, marking, and cutting the front part. Fit in the rubber seal around the area you have cut.
Attach the door with hinges, install draw latches, make shelves and glue them into place.
5. DIY Repurposing a Piano into a Liquor Cabinet
Do you love music and liquor? This is the perfect DIY for you.
You will require wood planks, a paint stripper, and a screwdriver.
Remove all the panels and keys, strings, and pins. Proceed to cover flaws using leather, apply varnish to change the look, make wine racks, and add LED lights feature.
6. DIY Conversion of Unused Speaker Into Mini Liquor Cabinet.
Are you a music lover? Do you want to convert your unused speaker into a liquor cabinet? You require this equipment; wood planks, paint, screw, hinges, and a LED light.
Begin by removing internal contents, mark the front part and cut it out. Sand and paint make shelves and fit them in.
Fit the door with the hinges and add lighting.
7. DIY Converting a Sewing Machine Table To a Liquor Cabinet
Do you have a sewing table that you are not using? Convert it to a liquor cabinet. You require the following materials steam pan, woodcutter, extra cardboard, hammer, and screws.
Start by cutting the upper part and fit in the steam pan to act as a holder. Add a shelf at the lower part then proceed to paint the table.
Lastly, attach handles to the cabinet.
8. Hutch Converted to a Liquor Cabinet
Converting a hutch to a liquor cabinet you will need screws, an iron sheet, chicken wire, paint, sandpaper, screws, screwdriver.
Begin by getting rid of the upper part of the hutch then sand the remaining part. Build your cabinet up by removing all the glasses and fitting the iron sheet at the back of the hatch.
Paint the hutch and add more style by replacing the glass with chicken wire.
9. DIY Conversion Fire Wood Rack to Liquor Storage
In this tutorial, you require a drill, circular saw, sandpaper, hack saw, wine rack, and paint.
After you have found the firewood and wine rack make adjustments on the racks, cut, sand, and paint the wood used for shelves.
Attach the top shelf to the wine rack and lastly attach a handle on the cabinet though this is optional.
10. Converting a Closet to a Liquor wardrobe
You do not need wood skills to make this DIY. Begin by removing the doors, adding cabinets, or modifying the pre-existing ones.
Proceed to add lighting for easy visibility and place it close to an electric socket. Paint the cabinet to the color of your choice.
11. DIY Pallet Wood Cabinet
Pallet wood is readily available and is the main component for this tutorial. You will require a hammer, nails/screws, and woodcutter.
Prepare the pallet by cutting it into two equal pieces and mark the shelf placement area. Create a lower shelf to place bottles and an upper shelf for glassware.
Stain/ paint the cabinet to your desired color then place the liquor cabinet in a strategic location.
12. DIY Liquor/Recording Cabinet
Do you love dipping your liquor while listening to music? This is the easiest DIY because you don’t need to construct or break anything.
All you need to do is create some space on your record player table and place some of the liquor on one of the shelves this gives you a vintage feeling.
13. DIY Conversion of Old Suitcase to a Liquor Cabinet
You will require a suitcase, cutting tool, screws/glue, and cardboard.
Begin by cutting the upper part of the case, seal the sharp edges with leather. Measure the size of the shelves you want to construct.
Use the plywood to make shelves and attach them to the suitcase using glue or screws. You can choose to apply varnish on the shelves to match with the suitcase.
14. DIY Converting Ammo Crate to a Liquor Cabinet
You require the following ammo crate, wood planks, crutches, screws with washers, and a screwdriver.
Begin by attaching the crutches on the sides of the crate. Make shelves and ensure they are straight and equal. Lastly, fill in with liquor.
15. Tambour Door Single Bottle Liquor Cabinet DIY
This tutorial requires carcass, plywood, double stick tape, mallet, wood glue, circular saw.
Begin by measuring the carcass for the construction, make a tambour door without forgetting the back panel.
Sand, scrape, and assemble the cabinet.
16. Yukon Liquor Cabinet DIY
Building a Yukon cabinet you require a saw, wood, woodscrews, wood glue, varnish, and stain.
Start by planning then design the wine rack. Sand the wood and assemble the shelves for the cabinet.
Varnish and stain the cabinet, after it is dry fit in legs. Lastly, assemble the wine rack and put the drinks on the cabinet.
17. Converting a Radio Console to a Liquor Cabinet DIY
You will require the following materials plywood, wood glue, hammer, and screws.
The first step is to gut the insides of the radio, fit well-cut plywood into the mainframe. Attach shelves then bring the whole radio console cover together using glue.
Use wood putty to fill in gaps.
18. DIY Making a Liquor Cabinet from a Book Shelf
You require the following materials composite bookshelf, harmer, paint, paintbrush, screwdriver, and handles.
This is fun and easy to make. Remove the back panel, add moldings for finishing and attach a handle.
Paint the cabinet to your color choice leave it to dry then add your liquor products.
19. Repurposing Antique Armoires to a Liquor Cabinet
Armoires can be utilized in the 21st century. You just need to add a bottle rack on the lower part and a glassware holder on top.
It has a large room that can accommodate all cocktail essentials, bar snacks, and serving dishes.
You will have a stocked liquor cabinet.
20. Wall Mounted Drop Down Pallet Liquor Cabinet DIY
In this tutorial, you require a pallet, measuring tape, woodcutter, drill, and screws.
Begin by cutting the pallet then enclose the top, bottom, and back of the pallet. Cut out the counter, paint, and seal the cabinet. Lastly, you can add a handle or a decal.
21. DIY bubbly Liquor cabinet
Begin by getting all the required materials. Carve the wood that needs to be carved, make the bubbly effect on the doors not forgetting to attaché handles.
Make shelves that liquor bottles can fit in. Watch the YouTube video to understand better.
22. DIY Building Custom Liquor Cabinet
Building a cabinet to suit your specifications requires 5 pieces of plywood, screws, and a screwdriver.
Have an idea of what you need, make the cabinet top, doors, and face frame. Make wine bottle holders, wine glass holders then cover the top part.
Lastly, mark the base and put in liquor.
23. Cable Reel Liquor Cabinet
Building this cabinet you will need a cable reel, drill, and a saw. Cut on the middle part of the reel to act as the cabinet.
Make a wine rack and fit it inside such that wine bottles can fit in. You can decide to attach a door or leave it that way.
24. DIY Bookshelf and Liquor Cabinet Combined.
Convert your book cabinet to a booze cabinet. Books and liquor bottles can be compared in terms of size.
All you need to do is move some of your books and make space for the booze. After all, who doesn’t like taking whisky while reading a good book?
25. DIY Old Alarm Clock Cabinet
If you have a back in the day alarm clock turn to the liquor cabinet.
First, open it and remove all its components then dust it. Add a metal frame to make it raised then paint it with your favorite color.
Use wood to create a glass holding door such that you can see the contents of the cabinet. Proceed to making a liquor rack and putting some lighting.
Place your liquor inside.
Coming up with your DIY liquor cabinet has merits; customization to your preference, cuts on cost as compared to buying a new one and the cabinet fits perfectly to your available space.
The above tutorials are very helpful you try them and customize your liquor cabinets.