Do hummingbirds fascinate you a lot? If yes, then, here are some amazing ideas you should check out. If you have hummingbirds around your home, this will definitely get their attention.
Like all animals, hummingbirds love food, if you have been trying to feed them with no success, you might be doing it all wrong. In this article, we have put together 25 DIY hummingbird feeder plans that you can make from your home with a few materials.
Table of Contents
1. How To Make A Hummingbird Feeder
The materials needed for this amazing hummingbird feeder include a plastic bottle, a plastic bowl with a lid, a hot glue gun, and a drill. Make two holes each on the lid of the bottle and bowl. Make sure the hole on the bowl lid is big enough for the bottle mouth.
2. DIY Easy Hummingbird Feeder
This is made from souffle cups, candlestick hangers, wire, and non-toxic paint. Since hummingbirds are attracted to red and yellow color; paint the outside of the cups in red and draw a flower on top of the lid with yellow paint. After this, make a duct at the center of the lid and hang it with a hook or candlestick hanger.
3. DIY Hummingbird Feeder
This is made from a plastic bottle, two aluminum cans, a screwdriver, drill scissors, and epoxy. Start by drilling holes on the cap of the bottle and use the top of the scissors to widen the hole. Make a hole on the bottom of one aluminum can then rip the cans into pieces taking out only the bottom piece of each can, after this, close the bottle in each other and seal it with epoxy.
4. Simple DIY Hummingbird Feeder
The required materials for this include solo cups, a magic marker, hole punch, scissors, and twine. Start by making a half-moon circle on each side of the solo cup. You can make a template for this or you can draw it freehand. After this, drill holes for hanging. Then, attach the string to it and you're good to go.
See also: 25 DIY Oriole Feeder Plans
5. How To Make A Hummingbird Feeder
This is made from a mason jar, hole punch, red plastic office folder, scissors, pen, and hanging mason jar lid. Start by removing the lid and the band of the mason jar, then make a new lid from the red plastic office folder. After this, prepare the hummingbird nectar and fill the jar with it.
6. DIY Cheap Hummingbird Feeder
This is made from Tupperware with a lid, plastic bottle, twine, scissors, felt, screwdriver, and hot glue. Trace the cap of the bottle in the Tupperware lid to make a hole. This is to make sure the mouth of the bottle fits into the hole. After this, attach the mouth of the bottle to the lid and you're good to go.
7. Hummingbird Feeder DIY
The materials required for this include a plastic bottle, a plastic container, wirecutter, foamy paper, red spray paint wire, and liquid silicone glue. The time needed for this DIY project is roughly 5 minutes when all the materials are ready and it is very cheap.
8. How To Make A Hummingbird Feeder At Home
This is made from a bottle of wine, a KFC serving plate, and wire. Remove the label of the wine bottle and rinse the bottle thoroughly. After this, prepare the hummingbird food and fill the bottle with it.
9. DIY Quick Hummingbird Feeder
To make this quick hummingbird feeder, you will need a plastic cup, a plastic bottle with a screw-on cap, eye hook, hot glue gun, glue stick, and hummingbird nectar. Screw holes on the screw-on bottle cap, then glue the cap upside down on the cup. After this, drill a hole on the bottom of the bottle and attach the eye hook through it. Prepare the hummingbird nectar and add it to the bottle.
10. DIY Homemade Hummingbird Feeder
This is made from a plastic bottle and KFC serving dish. Drill a one-inch hole on the KFC serving dish, then screw on the bottle into this hole. Drill a hole at the bottom of the bottle and fill it with hummingbird nectar.
11. DIY Hummingbird Feeder
Remove band and lid from the canning jar, use of to trace a circle on the plastic office folder. Then, cut around the circle to make a disc. Then, make holes on the plastic disc and prepare the nectar. The material used includes a canning jar, plastic office folder, scissors, chain, drill, and nectar.
12. How To Make A Bird Water Feeder
The materials needed for this DIY bird feeder include a bowl lid, a bottle, a pink, bolt, nut, and glue. Screw the cap of the bottle to the bowl lid with a bolt and nut then secure them with glue. After this glue, the lid to the plank and attach the bottle. Hang the feeder with the plank and you're good to go.
13. DIY Hummingbird Feeder
Measure and cut a scrap of wood needed for the hummingbird cabin, then assemble the pieces to form a small box and attach flowers to it. After this, assemble the roofing and attach it to the small box. Attach the container that contains the hummingbird nectar and stain the cabin.
14. DIY Hummingbird Feeder Bar
The materials needed for this hummingbird feeding bar include fluorescent tube protecting, red nail polish, epoxy putty, string, screw eyes, cork, and a small S hook. Start by sealing both ends of the tube protector, then mark and cut feeding holes on it. After this, make a big hole for filling the bird food. Then mark and cut holes for hanging on both sides.
15. Ant Moat for a Hummingbird Feeder
This is made from a plastic bowl, eye boots, j bolts, rubber washers, nuts, wrench, drill, and drill bits. Drill a hole at the bottom of the bowl, then seal the edges of the hole and insert a j bolt. Seal the inside of the bowl and tighten the bolt. String the coupling nut halfway down the j bolt then thread the eye bolt to the other end of the coupling. Hang the bowl and add water to it.
16. DIY Hummingbird Feeder Mason Jar
The material required for this includes a mason jar, red plastic folder, pen, scissors, hole punch, a cup of water, and a hanging mason jar band. Start by removing the lid and the band of the mason jar, then make a new feeder lid from the red plastic folder. After this, prepare the hummingbird nectar and allow it to cool then fill the jar with it.
17. How To Make A Hummingbird Feeder
Start by cutting two pieces of wood from a miter saw for the top and bottom pieces, then tape the two pieces together and mark the corners on them. Take it to the bandsaw and cut out the marked corner and drill holes on the pieces for the tube.
18. DIY Wine Bottle Bird Feeder
This bird feeder is made from a wine bottle. Get a wine bottle and rip off the label and wash the bottle. Then, wrap a piece of wire around the bottle and fill it with birdseed.
19. Hummingbird Feeder Cheap DIY
The materials needed for this include a bamboo skewer, string, hole punch, cup, scissors, and red plastic tape. Cut two small pieces from the plastic tape and place them on each side of the cup right below the top edge. Then, take a hole punch and make a hole in the cup just at the center of the red tapes. Attach Other components and prepare the hummingbird food.
20. Dollar Store DIY Hummingbird Feeder
This is made from a small plastic container with a lid, twine, fake flower petals, elastic band, scissors, and glue. It is a very simple and cheap project; the cost is roughly $5 and it takes up to 10 minutes to complete.
21. Hummingbird Feeder Plans
The materials needed for this DIY hummingbird feeder include pieces of cedarwood, tube, drill, drill bits, miter saw, and band saw. Cut two pieces of cedar for the top and bottom then, round the edges of both pieces with a band saw. After this, cut the side pieces and assemble the tube and the pieces.
22. DIY Glass Hummingbird Feeder
To make this, you will need a glass bottle with a lid, a glass jar, paint pens, plastic, a knife, and a string. Start by decorating the glasses with the paint pen or sharpie. Then, trace and cut the lid insert from the plastic and drill hole on the bottle cap with a knife. After this, assemble everything and hang the hummingbird feeder.
23. DIY Saucer Hummingbird Feeder
This is made from a red plastic plate, clear plastic bowl, tape, pieces of paper, and metal clothes hangers. Drill four holes on the center of the plastic plate and attach the hangers to it, then fill the bowl with hummingbird food and attach the bowl to the plate.
24. DIY Hummingbird Feeder
The materials needed for this include one plastic bottle, one large plastic cap, glue gun, craft knife, scissors, drill, sandpaper, and spray paint. Drill holes on the cap of the plastic bottle and use a craft knife to cut in between the holes to make a larger hole. Glue the cap inside the large plastic cap and attach the flowers to it with glue. After this, prepare the bird food and you're good to go.
25. How To Make A Hummingbird Feeder
The aim of building this hummingbird feeder is to have a feeder that doesn't drip. Therefore this is made from borosilicate glass, this glass is durable, strong and it can withstand outdoor elements.
Conclusion
All the DIY hummingbird feeder plans listed in this article are cheap to make and don’t require too much effort. Feel free to go through our list again and select your preferred hummingbird feeder plan.
Ask Me Anything