Do you need more storage space in your garage? or you want your garage to be a little bit more organized? If yes, then you are in the right place. The benefit of making a garage shelf is that it will help fix unnecessary clutter.
We have listed for you 25 DIY garage shelf plans that you can make for proper organization. In here, you would find large and small shelf ideas. Pick the one that best suits you and start the building process.
Table of Contents
1. How To Build Garage Shelving
The first DIY shelving on my list is made from wood (2×4" particularly). Locate the stud on your wall and determine the height of the shelving. Then, install the first 2×4 piece to the wall using a screw and then install two others at intervals. After this, add another 2×4 piece to the first and secure them with a nail slightly. Attach legs to both sides of the added 2×4 then take apart the 2×4 with legs from the braces on the wall.
2. DIY Garage Storage Shelf
To make this, start by clearing and cleaning the garage, then locate the stud in the wall and mark the spots. Measure the spot and use this to mark the 2×2 pieces where the shelf will be mounted. Also, determine the dimension of the shelves and cut all the pieces needed accordingly.
3. Easy DIY Garage Shelves
The materials needed for this DIY garage shelf include a power drill, circular saw, wood, screws, tape measure, plywood, pencil, and speed square.
Start by laying a large piece of foam insulation down on the ground and place large plywood of its size on it. Measure a 2×4" foot panel from the plywood and cut it down with a circular saw. Cut other pieces and assemble.
See more: 22 DIY Storage Shelf Plans
4. DIY Garage Storage Shelves
To make this, you have to have a well-defined plan that will allow you to know the number of shelves you're making and the bracket you will need. Make the brackets then install them at intervals to the wall then place rectangular boards on the brackets and you're good to go.
5. DIY Shelf For Garage
This garage shelf is made from a reclaimed door and pipes. Start by washing the door off the dirt and allow it to dry, once it is dried, sand the door and paint it in your desired color. After this, gather the pieces of the pipes and assemble the pipe layout. Then, using a dado, L-bracket, or any other support you can get, mount the door to the wall and attach the pipe layout to it.
6. Easy DIY Garage Shelf With Plans
The materials needed for this DIY garage shelf include a circular saw, Kreg rip cut, miter saw, impact driver, flip-top foot stand, wood pieces, wood screws, and 12 gallon totes. Get a plan for the shelf then cut all the pieces of wood needed for the shelves. After this assemble the shelves and cut 4 2×4s for the legs. Attach them to the shelves and you're good to go. You can get a free plan for this project by clicking the link below.
7. Best DIY Garage Shelf
The dimension of this shelf is 4 shelving, 8 feet tall and 2 feet deep. Also, they cost not more than $10. To start with, Mark all the studs on your wall and cut pieces of 2×4s to size the length of your desired shelving. Then, attach the 2×4 to the studs at intervals. Once the 2×4s are ready, attach pieces of rectangular boards to each of the 2×4s. After this, assemble the front support and legs to the boards.
8. Cheap DIY Garage Shelf
This is made from wood, wood screws, circular saw, power drill, measuring tape, speed square, and wood glue. Start by cutting all the pieces of wood needed then make 4 shelving assemblies. After this, assemble the legs and attach the shelves to them.
9. DIY Hanging Garage Shelves
The materials required for these DIY garage shelves include drill, miter saw screens, wood pieces, drill bits, and speed square. Get a long piece of 2×4" then Mark it at intervals then pre-drill holes to marked areas. After this, attach three legs to this 2×4 and secure them with screws. After this, assemble other parts of the shelves and you're good to go.
10. DIY Garage Shelves
This is made from totes, bench lights, wood glue, stud finder, pocket hole screws, drill, belt sander, and clamps. Start by cleaning the garage then make a cutting list for the wood pieces. After this, locate the studs and install 2×4s to them. Then attach the other parts of the shelving to this and you're good to go.
11. DIY Garage Storage Shelves
The materials needed for these garage storage shelves include circular saw, miter saw, wood screws, table measure, wood pieces, plywood, foam insulation, and Kreg rip cut.
Place some slat of foam insulation on the ground and lay a piece of plywood above it, the purpose of the foam insulation is to prevent the blade from scratching the ground when cutting the plywood. After this, cut the 2×4s into pieces and make 2 shelving assemblies. Attack the shelves to the shelving assemblies and you have your storage shelves.
12. How To Build Garage Storage Shelves
This garage shelf is built from mainly 2×4s and ½" OSB. The dimensions 172 inches long, 32 inches deep, and 23 inches space between each shelf. Start by making a chatting list for the project then chat and assemble the shelves.
13. DIY Garage Storage
To build this storage shelf, you will need a miter saw, power drill, hammer, nails, tape measure, and sheets of plywood. Measure and cut the pieces of wood needed then build the frame for the shelf. Attach the frame to the wall and assemble the workbench.
See also: 25 Kids Book Shelf Plans
14. DIY Garage Shelf For Tires
This tire rack is very simple to set up. All you have to do is to make a plan for it then measure and cut the pieces. After this, assemble the frame and attach the side pieces.
15. How To Build DIY Garage Storage Shelves
This is made from storage totes, screws, wood glue, line laser, jigsaw, magnetic screw head, and a stud finder. Start by cleaning the garage then sketch the shelving design. Once this is done, locate and mark the stud on the wall then install a 2×2 to it. After this fasten 2×4s uprightly to the 2×2. Install other parts and you're good to go.
16. DIY Hanging Shelves For Garage
This is made from wooden boards, miter saw, track saw, drill, clamps, sheets of plywood, driver, and Dewalt planer. Start by cutting all the pieces needed for the project, then measure and mark the wall where the board will be installed, repeat this for the ceiling as well. Then, install the boards and frame them with pieces of 2×4s.
17. How To Build Simple Garage Storage Shelves
The materials needed for this DIY storage shelf include a circular saw, level, screws, tape measure, clamps, drill, pocket hole jig and screws, and rafter square. Some amazing features that make it stand out include; the space in between each shelf (31inches), also the shelf is floating to prevent the bottom panel from getting soaked.
18. How To Build Garage Shelves
This is made from steel rails and a rubber mallet. It is very simple to set up and it doesn't require any complicated tools to stand right.
Start by making the base, make sure the holes of the rails are lined up then install the side pieces and hit it slightly with a mallet to hold it in place. After this, install the support pieces across the base and place the shelf, repeat this till you reach the maximum number of shelves you want.
19. DIY Big Garage Shelf
Measure and cut all the pieces needed for the project then take two long 2×4 pieces and join them by attaching cross braces on them with glue and screws. Assemble other parts of the shelf and you're good to go.
20. DIY Strong Garage Shelf
The materials required for this DIY garage shelf include a circular saw, plywood sheets, and sources of wood. a small and big hammer drill, screws, and impact driver. The dimension of the shelving is 2ft×8ft installed in a corner. Cut all the pieces needed for the project then assemble the shelving. Mount the shelving tongue wall and install the plywood on it.
21. DIY Garage Wall Shelving Unit
Make a plan of what you want to do. However, you can get the free plan for this shelf that contains the cutting list and the list of materials by clicking the link below. Measure and cut all the pieces of wood needed for the shelf then assemble the frame. Once the frame is intact, attach the shelves to the frame and you're good to go.
22. DIY Cheap Garage Storage Shelf
First, clear the garage and gather the materials and tools required. Then, start cutting the pieces one after another. Once the pieces are ready, assemble the brackets and install them on the wall. Then, screw two rectangular boards to each row of brackets and you have your shelves ready.
23. DIY Garage Shelves With Plans
This DIY garage shelf is built with 2×4s and OSB to cut the cost as low as possible. Start by cutting the pieced yo size and or still pocket holes on them. After this, assemble the back of the shelf and install the cross braces. Attach the other legs and nail the OSB on the shelves.
24. DIY $40 Garage Shelf Plans
A well-defined plan is necessary for this DIY garage shelf. Therefore you can download a free plan for this by reading further on the link below. Measure and cut all the pieces required for the garage shelf, then assemble the frame and slide the plywood through the frame and secure it with screws.
25. DIY Garage Storage Shelves
The materials needed for this DIY garage storage shelf include pieces of wood, a miter saw, table saw, screws, stud finder, tape measure, and an OSB. Measure and cut the pieces of wood to size then use them to build the shelving assembly. Once the shelving assembly is done, cut the OSB to the length of the shelf and slide it through the shelving then secure it with screws.
Conclusion
If you have a lot of things you would want to organize in your garage I would recommend building a big storage shelf, however, you can opt for smaller shelves if you have little to store. Thanks for stopping by, before you leave, you can do us a favour by sharing this content with friends and family on social media platforms.
Ask Me Anything