Are you thinking of a way to keep your closet tidy and organized always? One quick way to order your clothing is by having a closet with shelves. If yours does not have a shelf, you can build a couple of shelves for your arranging needs.
In this article, we have put together 25 DIY closet shelves that you can make easily. The making process for most of the closet shelves below is easy and won’t give you a hard time at all. Just pick your preferred project and start the building process.
1. DIY Closet Shelves
Are you thinking of making closet shelves? Therefore, this DIY closet shelf is for you. This is made from a circular saw, table saw, plywood, food screws, pocket hole jig, clamps, tape measure, and drill. Cut the plywood into pieces using a circular saw, then cut it into smaller pieces using a table saw. Then, assemble the frame for the closet with a pocket hole jig and screws.
2. DIY Closet Organizer Build
When building something for your home beware of the type of materials you will use. In this project, formaldehyde-free plywood is used because plywood that has formaldehyde gives off the gas with time and might cause air pollution in the house. Apart from formaldehyde-free plywood, other materials used include track saw, tape measure, drill, drill bits, screws, primer, and paint.
3. How To Build A DIY Closet Organizer
The first step in making this closet is to design the closet organizer, then cut the plywood into pieces for the shelves and support. The third step is to assemble the closet frame and the shelves.
4. DIY Closet Shelves
To make this DIY closet shelf, start by cleaning up the closet then remove any hanger or other hanging materials in the closet. Then, select sturdy plywood and cut it into pieces for the shelves. After this, install the pieces in the closet and secure them with screws.
See also: 18 DIY Cat Shelves
5. How To Build Cheap Closet Shelves
To start with, remove everything that has already existed in the closet and patch up the holes. Then get a thick MDF for the shelves. The materials used include a sheet of MDF, pine boards, poppler, and caulk.
6. DIY Small Closet Shelving
This is made from a pine board, drywall screw, circular saw, drill, wood screws, wood glue, measuring tape, pencil, and a stud finder. First, determine what you want to store in the closet, this will give you direction on how to design the closet. Then, cut the board according to the design and install them in the closet.
7. How To Install Built-in Closet Shelves
The materials needed for this DIY built-in closet include plywood, drill, circular saw, Kreg rip-cut, Kilz primer, rapidfuse glue, stud finder, and construction adhesive. Cut all the pieces needed for the shelves and determine the placement then paint the pieces. After this, assemble the shelves in the closet and attach shelf support.
8. DIY Closet Shelving Tutorial
This is made from wood, razor blade, drill, drill bits, screws, tape measure, miter saw, and jigsaw. First, take off everything in the closet and oath the miles up. Then, cut strips of wood and attach them to the wall as braces where the shelves will be mounted. After this, cut the pieces for the shelves and install them.
9. DIY Built-in Closet Organizer
The materials required for this built-in closet include a Dado stack, track saw, plunge router, gripper jig, pry bar, framing gun, drill, brad nail gun, glue dispenser, sander, and saw blade. Get a large piece of MDF then rip it down into smaller pieces. Prepare the pieces and sand them down then assemble them in the closet and secure them with brand nails.
See also: 24 DIY Pantry Shelves
10. DIY Closet Shelving
This closet shelf is made from three pieces of plywood wood. Cut the plywood to a long rectangular board then cut the pieces for the barges and brackets. Then, install the boards to the wall and hold them down with brackets.
11. DIY Closet Shelves
The materials needed include a circular saw, tape, iron edge banding, plywood, speed square, and drill. This closet has two sections, the horizontal shelves, and the vertical shelves. The horizontal shelves are installed in the center of the closet framed with three pieces of long plywood board. Then the vertical shelves were installed on both sides of the horizontal shelves.
12. Cheap DIY Closet Shelves
Building these closet shelves is very simple and straightforward, also it is inexpensive but durable. It is made from wood, wood screws, wood glue, miter saw, table saw, tape measure, paint, and paintbrush. First, clear and clean the closet then cut the wooden boards for the shelves. After this, install the boards in the closet with screws and glue.
13. DIY Salvaged Wood Closet Shelving
The materials needed for this DIY project include black iron pipe, wood, wood saw, sandpaper, drill, 90degree elbow fittings, black iron floor flange, tee fittings, hydrogen peroxide, and satin polyurethane spray finish. Start by cutting the wood into pieces for the shelves, then rust the black iron pipe with some hydrochloric acid. After this assemble everything and install them in the closet. Handle the acid with caution and beware of its hazards.
14. The Easiest DIY Closet Shelves
This is one of the simplest kinds of DIY closet shelves you will see around. It is made from MDF, miter saw, measuring tape, level, and nail gun. Cut the MDF into rectangular boards then cut strips of wood which will serve and the braces. Then, install the braces to the wall and mount the boards on it.
15. How To Build A DIY Closet Organizer
The materials needed for this DIY project include wood, wood screws, wood glue, tape measure, miter saw, table saw, and paint. Start by cutting all the pieces of wood needed for the shelves, sand them down and paint them white. Then install the shelves in the closet.
16. DIY Basic Closet Shelving
This is made from plywood boards, hardwood, furring strips, screwdriver, pencil, level, paint, paintbrush, and wood screws. Start by clearing the closet then measure and mark the spots you want to install the shelves and how you want it to look. Then, cut and install the shelves.
17. DIY Custom Closet
This is made from plywood, miter saw, Brad nails, Brad nailer, tape measure, and wood stain. After all the pieces are ready, measure and mark the spots where they will be installed.
18. DIY Closet Shelves On A Budget
To start building these closet shelves, first, locate the stud and mark the spot. Then, fix brackets to just below the marked area so that the top shelf board will lie on the stud. The materials used include a stud finder, wood, screws, and brackets.
19. DIY Closet Organizer
This closet organizer is made from a large piece of 3/4″ of plywood. Cut this piece into smaller rectangular boards and paint them. After this, assemble them and install them in the closet with screws.
20. How To Build A Custom Closet Organizer
The materials required for this include table saw, tape measure, wood, screw, jig, and sandpaper. Cut all the pieces needed for the shelves, sand them and paint them. Then, install them in the closet.
21. DIY Closet Shelves
To build these massive closet shelves you need to determine the dimension of your closet and how big you want the shelves to be. Once you determine the dimension, cut the plywood according to the dimension and install the shelves.
22. Closet Shelves Tutorial
The materials used in making these DIY closet shelves include poplar boards, table saw, nail gun, tape measure, and wood screws. Since the closet is a narrow space, you don’t need a closet divider. All you need to do is to install the pieces of poplar boards and you have your shelves.
23. DIY Simple Closet Shelves
This is made from MDF, wood, screws, tape measure, stud finder, drill, and level. After cutting the MDF into small rectangular boards, the next thing is to paint them and install them in the closet.
24. Easy Closet Shelves DIY
To build this you don’t have to take apart everything that is already in the closet; clear and clean the closet but leave the hanging rod. Then, install the shelves at both corners of the closet leaving the wide opening with only the hanging rod.
25. DIY Under Stairs Closet Shelves
The materials needed for this under stair closet shelves include a miter saw, wood, table saw, tape measure, speed square, screws, and a stud finder. Cut all the pieces for the shelves and assemble the frame. After this, install the frame in the closet and you’re good to.
Closet shelves aren’t hard to make, with a few materials and tools handy with the perfect building plan you should be able to make one with ease. If this article has been helpful to you, please share it across your social media platforms with your friends and family. Thanks for stopping by.