I think Built-in shelves are more beautiful than regular shelves, what do you think? These types of shelves do not take up space in your home because they are made into the wall. They can be used for decor or storage, it’s all up to you.
In this article, we listed 25 DIY Built in shelves that you can make. Most of them are woodworking projects that will require some level of expertise. If you do not know anything about woodworking, feel free to ask for help from a friend who does.
Table of Contents
1. How To Make Built In Shelves
The materials needed for these amazing DIY shelves include pieces of wood, screws, a power drill, stud finder, and plywood. Locate and mark the stud on the wall then mark an inch down the stud where the braces will be attached, so the top of the shelves will fall on the stud properly. Using a level, trace the markdown of the stud across the wall to the other sides and screw the braces on it.
2. How To DIY Built In Shelves
To make this, start by ripping apart the baseboards from the wall. Cut all the pieces needed for the shelves and start building the shelves from the ground, the length of the shelves is one inch shorter than the ceiling.
3. DIY Built In Shelves
The materials needed for these DIY shelves include plywood, table saw, speed square, level laser, stud finder, and tape measure. Start by cutting the plywood to pieces then locate the stud and fix the braces to the spot. Use a tape measure to measure the distance between the first brace and the second.
4. DIY Built-in Bookcase
Here’s a straightforward guide that will show you how to build a DIY built-in shelf for your book storage. It is a woodworking project that will take some time and hard work to complete, but it will be worth the effort in the end.
5. DIY Built In Kitchen Shelves
Start by cutting through the wall of the kitchen and then install the frame of the shelves to the openings. After this paint and color the shelf.
6. Simple DIY Built In Shelves
The materials needed for this DIY built-in shelves include PVC trim boards, oak plywood, Kreg pocket hole jig, screws, and table saw. Cut the back, trims, and sides from the plywood, then assemble the trims on the back pieces with screws. After this, attach the sides and paint the shelves.
7. DIY Built In Bookcases
These amazing wall-to-wall shelves are made from wood, miter saw, plywood, stud finder, tape measure, level, and screws. Cut the wood and plywood into pieces then assemble the bench and drawer. After this assemble the shelves and mount them on the bench.
8. DIY Built In Shelving
To make this, you need to draw the design of shelving you want and how many shelves you want to install in the shelving. Then, assemble two shelving layouts and cut the shelves. Install the shelves to the shelving and you're good to go.
9. Easy Built In Cabinets
The materials needed for this built-in cabinet include a tape measure, Carpenter's Square, cordless drill, jigsaw, brand nailer, compound miter saw, wood glue, plywood, wood, and foam insulation board. Start by cutting the pieces needed for the project then assemble the workbench. Once the workbench is ready, assemble the shelves and mount them above the workbench.
10. How To Make A Built In Shelving
This is made from shelving units, deck screws, wood shims, wood glue, construction adhesive, acrylic latex paint, and a miter saw. Cut all the pieces needed for this project then take the back piece and frame it with the four side pieces, then attach a middle piece that divides the shelving into two uneven parts. After this, attach the shelves, and voila!
11. Custom DIY Built In Bookcase
This is made from MDF, miter saw, table saw, tape measure, and level. Cut the MDF into pieces then mold the shelving assembly. Once the shelving assembly is ready, attach the shelves and you're good to go.
12. DIY Built In Bookcases
This built-in bookcase has two sections, the mainframe(cabinet) and the upper shelves. Gather materials needed for the project then assemble the frame for the cabinet. Once the cabinet is ready, assemble the shelving and the shelves.
13. DIY Wall With Built In Shelves
The materials needed for this shelf include nails, screws, wood filler, wood glue, stone pebbles, drill, and paint. Once all the materials are ready, cut and assemble the shelves.
14. DIY Built In Wardrobe
Draw the plan for this corner wardrobe that is just some inches below the ceiling. Then, gather all the materials and tools required for the work. The materials needed for this DIY bench seat include wood, wood shims, nails, Kreg jig, wood screws, and deck screws.
Start by building the frame for the shelving then mount it in the wall. After this, cut and prep the plywood sheets for the shelves. Attach the shelves to the frame and plaster everything.
15. DIY Built In Bookshelf
Draw the plan for this bookshelf, then determine the type of wood you want before going to the store. Purchase the wood and other materials you don't have available in your garage or workshop. Once you get the materials and plan, start by cutting the wood into pieces, then assemble the shelving units and shelves and you have your bookshelf ready. Paint the bookshelf with your desired color of paint.
16. DIY Built In Shelving Unit
This DIY shelving unit takes up to three days to complete and the cost of making it is not less than $300. It is made from plywood, poplar, glue, caulk, impact driver, level, chop saw, paint, pencil, circular saw, cordless finish nailer, and builder's square. Start by designing the shelving unit on a sheet of graph paper. Then cut the pieces for the shelving and the shelves.
17. DIY Built In Shelves
The materials required for this include table saw, plywood, miter saw, tape measure, screws, and level. Cut all the pieces and assemble the pieces to form the shelving assembly, then attach the shelves.
18. DIY Built-In On A Budget
To build this, it is very simple and straightforward. All you need to do is to get a bookcase from the store. Then assemble it according to the instruction from the manufacturers.
19. DIY Built In Shelving For Less Than $175
The materials needed for this DIY shelving include MDF, miter saw, hand saw blade, screws, jigsaw, tape measure, stud finder, level, and paint. Start by cutting the MDF into pieces and assemble the shelving. After this, attach the shelves to the shelving.
20. How To Build Built In Shelves
To make these built-in shelves, first determine the location you want the shelves to be, the length of the shelving assembly, and the distance between one shelf to another. Then, attach braces to the wall and assemble the shelving assembly on it. Then attach the shelves.
21. DIY Built In Shelves
The materials needed for this DIY built-in shelves include pegboards, hand saw, router, drill, hammer, square, wood glue, wood filler, and primer. First, measure the pieces for the shelving, then cut and attach the rabbit joint to the top shelf. After this attach the support, center, and bottom shelves.
22. DIY Custom Built In Shelves
To make this, first, measure the dimension of the space you want to install the shelves. Then, sketch the rough plan of the shelves on a sheet of graph paper and make the cutting list. Cut all the pieces of wood needed and assemble each part. The materials used include MDF boards, air compressor, impact driver, drill, caulking gun, speed square, and clamps.
23. DIY Built In With Bench Seat
The materials needed for this DIY bench seat include IKEA base cabinets, wood, poplar boards, wood shims, nails, Kreg jig, drywall corner beads, wood screws, and weck screws. Start by building the frame for the shelving then mount it on the wall. After this, cut and prep the plywood sheets for the shelves. Attach the shelves to the frame and plaster everything.
24. DIY Custom Built In Shelves
The materials needed for these DIY custom shelves include MDF, miter saw, wood screws, level, tape measure, and table saw. Start by making a plan for the project, then cut all the sources needed and prep them. After this, assemble the shelving and the shelves.
25. DIY Built In Bookshelf
This is made from wood, a large sheet of paper, speed square, circular saw, tape measure, compass, pencil, and paint. Start by making a template for the bookshelf on a large sheet of paper. Then, use the template to cut out the pieces of wood needed for the bookshelf. After this, assemble the pieces and join them together.
That’s a wrap! We have come to the end of this epic compilation of DIY built-in shelves. As you may have noticed, all the ideas listed in this article are beautiful. You just have to find the perfect one based on how your home is. Feel free to contact us via the comment section below if you have any questions or contributions regarding this article.
Ask Me Anything