Not satisfied with DIY bird feeders out there? Not to worry, We actually did some serious digging, and as luck would have it, we were able to find 25 amazingly outstanding DIY bird feeder plans that you can DIY.
Delete that thought of purchasing a bird feeder, you would end up spending way too much! The plans we have listed are cheap and affordable. You’ll need a couple of materials and tools for the build. Are you ready? let’s begin!
1. How To Make A Bird Feeder
This DIY bird feeder is made using 2 plastic bottles, a plate, a knife, and a thin metal rod for hanging. On opposite sides of the bottle, cut out a square and take off the top part of the bottle. Glue the first bottle to the plate, work on the second bottle and achieve your feeder.
2. DIY Bird Feeders
To make this recycled bottle feeder ensure to get wood, bottle, glue, drill, screw, and brackets. Glue base to the mainboard and put brackets. Drill holes for the string to hold the bottle in place. Put a bowl on the base where the birdseed will flow from the bottle into and you're done.
3. How To Make A Bird Water Feeder
Right here's a homemade bird water feeder using a wood strip, rope, plastic bottle, and bowl. Glue bottle cap to bowl and make a hole then put the screw and hot glue. Attach the wood strip to the bowl, out bottle cap, and hang.
4. DIY Automatic Bird Feeder
Get 500ml coke and mountain dew plastic bottles, barbecue sticks, candles, wire, and scissors to make the feeder. Then 1ltr zonrox plastic bottle, wire, candle, cable tie, cutter, and scissors to build up the birdhouse. Finally 1ltr zonrox, 300ml plastic bottle, candle, wire, and scissors for the water.
5. Easy DIY Bird Feeder
Trust me you won't be needing tools to get this done, just get the following supplies; Birdhouses, Clear Gorilla Glue, paint, foam brushes, Flat tray with a lip, L brackets, String. Move ahead to paint your wooden birdhouse and tray, glue brackets to the tray, and hang up at the preferred location.
6. DIY Acorn Bird Feeder
You should get the following materials ready, ¼″ metal mesh, round wood bowl (thrift), sisal rope, two small nails, metal snips, and needle-nose pliers. Fold mesh and Seal opposite ends to each other. Fill mesh with birdseed and attach to the bowl. You can now hang up.
7. How To Build A DIY Bird Feeder
Following the patterns, you can easily build your bird feeder the right way, try it out now. A-1pc of 1x6 lumber - 13½" long, 1 pc - 5½" long, B-1pc of 1x6 lumber 4" long, 1pc 2½" long, C-2pc of 1x2 lumber - 7¾" long, 1pc 5½" long, D-1pc of 1x6 lumber 5½" long, 1pc 4¾" long, E-1pc of ½" dowel 7" long, 10pcs of 1¼" screws, 2" brad nails.
8. DIY Bird Feeding Station Plans
This is a complex wooden bird feeding station made out of lumber. You should get the building once you have the following materials available. 1pc of 4x4 lumber - 10", 2pcs of 2x6 lumber - 8", 1pc of 2x4 lumber - 4", 1¼" screws, wood putty, wood stain, wood glue, 2½" screws.
9. DIY Low-Cost PVC Bird Feeder
You should get a PVC or sewer pipe and cut twenty-four inches, get PVC cement, 2 PVC cap, and a non-stick pizza crisper. Cement cap to the main pipe, on the second cap, pre-drill the center. Attach crisper to the bottom cap then paint and you're done.
10. How To Make Easy Bird Feeder
Get a plastic bottle, bowl, tray bolt, and nut. Make the same hole on the bottle cap, bowl, and tray and secure with a screw. Make a small opening on the bottleneck and fill seeds in the bottle then cover on the cap. You can now hang on a tree or where you expect the birds to come around.
11. DIY Bird Feeder From Plastic Bottle
You will need 2 dowel rods, a birdseed, a drawing pin, a plastic bottle with a cap, and scissors to get this job done. Go ahead to make two holes on opposite sides of the bottle and pass a rod through. Above the first rod do the same for a second rod to pass through. Pour seeds and hang up.
12. How To Make A Bird Feeder
This isn't the regular wooden or PVC nor plastic feeders. Mix seeds in gelatin in boiling water, fill cookie cutters with mixed seed tightly, and leave to harden. Now take off the cookie cutters and you have your beautifully shaped bird seeds.
13. How To Make A Bird Feeder With Glass Bottle
A beautiful bird feeder with wood and glass bottle made using the following; 1⅝" screws, brad nails, 1x6 lumber, 1x2 lumber, 1x3 lumber, eye screws, glue, measuring tape, miter saw, clamp, file set, hammer, hole saw set and drill. When you have all these you can now build and fill with birdseed.
14. How To Build A Platform Bird Feeder
A bird feeder platform that suits your backyard for your birds to feed on and with these laid out patterns you can easily build yours at your convenience. A-1pc of ¾plywood - 16x16" long, B-2pcs of 1x3 lumber - 16" long, 2pcs - 17½" long, C-2pcs of 1x8 lumber - 15½" long, C-2pcs of 1x4 lumber - 17½" long, 1pc of 1x1 lumber - 17½" long, E-4pcs of 1x6 lumber - 22½" long.
15. DIY Bird Feeder
This is a mini hut for random birds if you enjoy listening to singing birds. It's a basic and quick one that doesn't really require any special skill. It is made out of scrap ply pieces and dry grass where water and seeds are kept for the birds in a small container.
16. DIY Easy Bird Feeder
This is an easy bird feeder that is set in the backyard and doesn't require any build, with an old bike you can have your feeder in place with birds eating from it. So all you need is the bike, brass clean-out cover, ¾' copper cap, terra cotta saucer, a tube of Liquid Nails, soldering supplies, 4' drywall screw, and birdseed.
17. How To Make A Bird Feeder
It's advisable to have your carpentry skills intact because this is a really beautiful piece of art set out here. This birdfeeder is unique in its own way, set out like it's for the king of birds. But with your cedar and glass and the required tools, you will get this done.
18. DIY Bird Feeder From Plastic Bottle
The following materials will be needed to achieve this; wire, pliers, screwdriver, plastic bottle, soldering iron, CD/DVD marking pen, 4 plastic caps, plastic plate, screw, and stick. Move to the working table and get your DIY done.
19. Homemade Bird Feeder DIY
This is quite different from other DIY birdfeeders, even though it's still made with plastic. But this has spoons attached on the sides of the plastic to serve as a direct feeder to the bird instead of letting the seeds put on the ground or in some cases plates are used.
20. How To Make A Bird Feeder With 1 Board
No doubt to some extent extra skill is required to get this done as this is quite complex. Ensure that you have the following in place before you start. Cedar, tape measure, circular saw, glue, brad nailer, hinges and galvanized wire. Do a nice job!
21. How To Build A Wine Bottle Bird Feeder
Use these cut lists to craft out this beautiful feeder lying in your backyard or in front of your home. 1″×2″ Furring Strips at 3 ⅝″ (sides), 1″×2″ at 4 ⅝″ (back), 1″×2″ at 6″ (front), 1″x2″ at 6″ (roof) with a 45° cut at one end of each, 1″x2″at 12″ (vertical sides) with a 45° cut at one end of each. Poplar Hobby Board at 6″×6″, at 6″×13 ½″ with a 45° cut on both sides of one end, 8 foot 1″x2″ pine furring strip.
22. DIY Wooden Bird Feeder
An easy way to have birds around your home is to have a feeder close by. Right here is a wooden house-shaped bird feeder made using cedar and you don't have to break the bank to get this done. It's inexpensive and simple.
23. DIY Window Bird Feeder
Unlike most feeders that hang on the tree or are lying on the floor, this feeder is attached to a window instead. This is constructed using a Scrap pine, Pack of 4 vacuum suction cups, 6mm-1.00 metric Wing Nuts, Table saw with a flat top saw blade for cutting dados, Chisel, Mallet, Router, and router bits.
24. DIY Macrame Hummingbird Feeder
For those who love hummingbirds, this feeder is specially made for hummingbirds and is unique in its own way. All you need is a clear bottle, hummingbird feeder tube with a stopper, macrame cord, scissors, Command Outdoor Wire Hook, water and sugar, spray paint.
25. DIY Wine Bottle Bird Feeder
You will require a carpentry skill set to carry this out. Get a wine bottle, glass cutter, wood, cutting saw, glue, drill, and screw. Move on, make your beautiful DIY bird feeder just the way you want and that's it!
We have come to the end of this article! I am sure you loved the amazing DIY bird feeder plans listed above, feel free to choose from our epic list. If you have any questions or contributions regarding this article, drop them in the comments section below.