If you own a bicycle or bicycles and you don’t have a bike rack, you are doing the wrong thing. A bike rack helps to organize your cycle. You would agree with me that having a lot of cycles at home can be space-consuming.
We did some serious research and found some of the best DIY bike rack ideas made by creative folks. Go through our list and I’m sure you will find the perfect bike rack to make. Making a bike rack isn’t as hard as it seems, you should be done in a jiffy.
1. DIY Wall Hanging Bike Rack With Storage
The first bike rack on my list is made from wood, glue, drill, screw, and table saw. Cut out the pieces for the base, join them together with glue, clamp them, and all them to dry. Glue the side pieces to the back piece and secure them with screws. Assemble all the pieces and spray paint them.
2. DIY Bike Rack For $20
The materials needed for this DIY bike rack are wood, drill, screw, and table saw. Measure the area you would want to install your rack and cut a long wood to size it. Screw the wood to the stud very well and pre-drill holes in it for the hook. Can't the bicycle to the hook. Then make a small locker for the bike accessories.
3. How To Build A Bike Rack
This DIY bike rack is super simple to make and requires fewer materials. Cut 2 60cm wood and 2 80cm wood. Take 1 60cm and 1 80cm and make a 60×60 90 degrees shape with it. Mark the 80cm wood around 60cm and attach the 60cm wood to it with glue and secure it with a screw. Do the same for the other pieces.
4. DIY Kids Bicycle Rack
This is made from wood, wood glue, pocket hole screw, measuring take, and paint.
Start by making the base, glue the wood together to form a square, and secure it with a pocket screw. Drill a pocket hole on the base to attach the support. Assemble all the pieces and paint the rack and you're good to go.
5. DIY Free Standing Bike Rack
This is made from wood, glue, screw, and bike hooks. This bike rack has three major parts; the base, the vertical stand, and the support. Assemble the parts using glue and screw. Pre-drill holes on the support and fit the hook inside the hole. Hang your bike to the book and you're good to go.
6. DIY Bike Rack
To make this DIY bike rack, you will need a crib rail, paracord, 4 eye hooks, screw, and 3 pieces of wood (2 small pieces and 1 long piece). Screw the 2 small pieces to each side of the crib then screw the long piece to the small pieces to form the base. Attach an eye hook to the base and one to the crib, do this for the other end of the crib and base then pass the paracord through it and secure it with knots.
7. DIY Wall Mounted Bike Rack
This amazing bike rack is made from wood, screw, drill, drill bits, and table saw. The shape of the rack is a bright angle triangle. Cut all the pieces needed for the triangle and secure it with a screw.
8. DIY Bike Rack With Storage
Start by cutting all the pieces needed for this bike rack and sand them down to make them smooth. Assemble the pieces and hold them together with glue and screw. Then attach it to the wall.
9. How To Make A Bike Rack Stand
To make this you need to have little or basic knowledge of welding because you will be working with metals and you will join metals by welding. Weld all the pieces of metals together and paint them.
10. DIY Bike Rack
This is made from drill bits, a hammer, measuring tape, screws, and lumber. Cut the pieces of wood and join them together with screws. Make sure the space between each is wide enough to accommodate the back wheel of the bikes.
11. DIY PVC Bike Rack
This is made from PVC pipe. As you know PVC pipes are always a piece of unique equipment when it comes to DIY crafts. It's made from PVC pieces, elbow fittings, and tee fittings. All you need to do is assemble the pipes and the elbow and you will have your bike rack.
12. DIY Bike Rack
The materials needed to make this bike rack include boards, plywood connectors, wooden lines, and 2 metallic hooks. Assemble all the pieces of boards you need and hold them together with the plywood connector. Attach the metallic hooks in the mainboard to hang some accessories.
13. DIY Best Bike Stand
This is made from scrap wood, screw and table saw. Measure the length of the Mike and measure the size of the tire as well, use this measurement to buy the pieces of wood. Assemble the pieces and screw them together and you will have your bike rack.
14. DIY $8 Bike Stand
This can be made with as little as $8 and it is very simple to put together. It is made from wood, screw, saw, and drill. Cut all the sources for the rack, assemble them and hold them tightly with screws.
15. DIY Folding Hitch Bike Rack
This is made from an aluminum angle piece, saw, cutting Wheel, jigsaw, and screw. Cut the aluminum angle piece, use the grinding machine to smitten the edges then drill holes on it where it would be attached to the cargo. Make pitches on it as well.
16. DIY Bike And Skateboard Rack
This is made from pieces of wood, 2 pallets, 4 hooks, a drill saw, screw, chisel, and a mallet. Make 6 boards flush from one of the pallets and remove the slat in the second. Screw five of the boards flush together with the slat. Then, screw the 6th board to the five boards at an appropriate height.
17. DIY Wooden Bike Rack
The materials needle for this DIY bike rack includes a wooden plate, wooden beam, glue, jigsaw, and clamp. Start by cutting the pieces from wood then glue them together and use 3 screws to secure the base and just like that you have your rack.
18. DIY Front Bike Rack
The materials needed to make this are an old bicycle, a thin tube, 4 pieces of metal. Start by removing the rear triangle of the old bike, fix the four metal pieces to attach the rack to the bike. Assemble every other part of the rack and paint it.
19. How To Make A DIY Bike Rack
This bike race is made from wood, wood for, and screws. Assemble the pieces of wood and glue them together. It is a very simple project and requires less cost. You can make it capable of holding more bicycles, it is totally up to you.
20. DIY Bike Rack
This is made from screws, bike hooks saw, and take. Cut the wood to size the length of the bike, make 4-5pieces of this but the width depends on the number of bikes you want to hand on it, therefore you can have more than 5 pieces. Screw small pieces of wood to each long piece at the bottom and join the small pieces with long pieces to form the base.
21. DIY Wall Mounted Bike Rack
This is made from wood, grit sandpaper, table saw, and glue. Cut a piece of wood to size your desired length of bike rack. Make a 90-degree shape from a piece of wood and make a notch on the longer wood to attach the right angle piece.
22. DIY Garage Bike Rack
This DIY bike rack is made of wood and nails. It is super simple and quick to make. It eases the stress of picking up messy bikes around the house. All your bees to do is cut all the pieces of wood required, assemble them, and secure them together with nails.
23. DIY Pallet Bike Rack
All you need for this bike rack is a packet, nails, and hammer. It is a form of restructuring project because you're turning a pallet into a bike rack completely. Cut the pallet from one side, flip it over and cut it from the other side leaving one gal without support. Give it support by nailing a piece of wood to it then place the other half on top of it and you have your bike rack.
24. How To Build A Fork Mount Bike Rack
This is made from wood, wood glue, floor flange, tee fittings, and PVC pipe. Measure the length of the rack and use that to cut the wood. Place two-floor flanges and trace their holes on the wood. Pre-drill the holes and secure the floor flange to it with a screw. Attach the tee fittings on the floor flange and you're good to go.
25. DIY Copper Bike Rack
This is made from copper pipe, felt, drill and screw. Start by making the "T" fittings for the base then attach a long pipe to it and Polish it. It is so simple to make. A copper bike rack is quite durable and can be used for a long time without needing a replacement.
A bike rack is made to hang your bicycle to the wall or any place you want. It creates more space and makes the environment look beautiful. We included plans for people who have multiple bicycles and also for people with just one. You’ll find the perfect plan for you, just keep looking.