Bats are the best if you want to keep your environment from bugs and mosquitos. Building a bat house will attract bats to your house and they help you control the pest issue. A lot of people have asked us to compile this list, so, here goes.
In this article, you will find 25 DIY Bat house plans that you can DIY from the comfort of your home. About 90% of the plans listed below are woodworking projects that will involve the use of special tools.
Table of Contents
1. Building A Simple Bat House
This is made from cedar, miter saw glue, track saw, and pencil. Start by cutting all the pieces needed, then glue the back and the middle pieces together separately with glue. Allow them to dry and trace a design of the bat on a piece of wood. Cut out this design and glue it to the bat house.
2. How To Build A Bat House
Since there are lots of bat house designs, you need to determine the type of design you want beforehand and gather the materials. Get a piece of wooden boards and cut it down to pieces, glue the pieces together and allow them to dry. After this, assemble the pieces and you're good to go.
3. How To Build A DIY Bat House
The materials needed for this include plywood, brad nails, brad nailer, laser cutter, and glue. Measure and cut the plywood size, then make the box assembly. After this, sand and stain the bat box and hang it on a tall object.
4. How To Build A Bat House
The materials needed include cedar boards, plywood, planer, screws, miter saw, and tape measure. Start by cutting the plywood needed for the back piece. Then, cut the cedar boards and pass them through the planner to smooth them. Cover the interior of the box with plastic mesh and hold it down with a staple gun. Then, join all the pieces together with a silicone caulk.
5. DIY Bat House
The materials needed include wood, a sheet of plywood, plastic mesh, galvanized wood screws, silicone caulk, elastic drill, and paint. Measure and cut the wood to size then make shallow grooves on the interior pieces. After this glue and screw the pieces together.
6. DIY Simple Bat House
This is made from wood, deck screws, wood glue, miter saw, jigsaw, and colored pencil. Measure and cut the wood to pieces then take the back panel and make grooves on it which will allow the bats to climb up into the house. After this assemble the pieces and draw a bat picture at the entrance of the house.
7. How To Build A Bat House
The material needed for this includes a 6-foot cedar fence board, deck screws, drill, miter saw, clamps, speed square, wood joinery biscuit, wood glue, and T-plate bracket. Measure and rip down the cedar board to length, then join the pieces using simple joinery. After joining all the pieces, stain the box and you're good to go.
8. DIY Bat Box
To build this bat box, locate a sunny environment that will be as far away from predators as possible, then farther away from the materials and tools needed for building. The materials used include non-toxic solid board/ plywood, coated deck screws, pint water-based exterior primer, stain, and paint.
9. DIY Bat House Build
The materials needed for this include wood, wood screws, wood glue, plastic mesh, miter saw, table saw, and tape measure. Once you've gathered every materials and tool, chat the world to pieces and line the interior with plastic, then assemble the pieces with screws
10. DIY Bat House Build
This is made from a cedar fencing board, dark stain, gutter guard mesh, silicone caulk, and exterior screws. Once you've got all the materials, Rip down the boards into pieces and cover the interior with nesh. Then, attach the pieces with silicone caulk and exterior screws.
11. How To Make A Bat Box
This unique bat box is called Kent bat box and it is made from untreated wood. The size of the bat cave on the bat house should not be more than 25mm which is the size of the bat.
12. How To Make A Bat House From Scrap Wood
This is made from lumber, plywood, chicken mesh, staple gun, and caulk. Cut the back, roof, and middle pieces from the plywood and cut the side pieces from the lumber. Cover the back piece and the middle piece with the chicken mesh then join all the pieces together.
13. DIY Bat Box Plans
To make this you need an already made bat box, ladder, drill, screws, saw, and nails. Once you get the ready-made bat box, assemble it with screws and nails. Then use a ladder to hang it high up on the walk.
14. DIY Big Bat House
The required materials include boards, wood stapler, staples, dark wood stain, T-plate, drill press, bird netting, and miter saw. Measure and cut the board to pieces then join the front and back panel. After this drill ventilation holes to the sides of the house and attach the bird netting to the base.
15. DIY Bat House For Backyard
This is made from red oak plywood, cedar fencing, Cedar, caulk, exterior screws, plastic mesh, ebony stain, and miter saw. Cut the plywood to pieces and smooth each piece with a sander. After this, stain the interior of the bat house with ebony stain and attach the plastic mesh to it, hold the mesh tightly with a staple gun. Then assemble the side pieces and the top piece.
16. Tips On Building A Bat House
To build a bat house, look for a suitable location where there is adequate sun and high enough to protect the bats from predators. The location must be near water sources as well. After finding a suitable location, gather the materials and start building.
17. How To Build A Bat House
This is made from plywood and cedar planks. Cut the back and front pieces from the plywood and cut the sides, roof, predators guide from the cedar plank. Attach plastic mesh to the back piece then assemble all parts, you've them together and you're good to go.
18. How To Make A Bat House
Start by cutting all the pieces needed for the bat house then assemble them and join them together with screws. The materials used include wood, screws, drill, and stain.
19. Bat House DIY
The materials required for this include pallet, wood glue, table saw, nail gun, packet burster, dark wood stain, and air compressor. Disassemble the pallets and straighten the edges. After this, sand the boards down and assemble the bat house with it.
20. DIY Bat House
This is a four-chamber bat house. Each compartment is divided with a plywood board and two spacers. This style is to make sure there is maximum space for every bat that comes into the bat house.
21. DIY Cedar Fence Bat House
This is made of cedar board, hammer, drill bits, nails, and hand drill. Cut the cedar board into five pieces and round the edges of four out of it then drill hanging home to the back piece, then assemble other pieces on it and you're good to go.
22. Batman Logo Bat Box House
To make this, you need a cedar board for the base, cedar strips for the sides and cedar strips for the top, a nylon mesh screen, measuring tape, staple gun, drill bits, and palm sander.
Cut the cedar board down to pieces, then assemble them with nails.
23. Building A Bat House With Wood
The materials needed for this DIY bat house include plywood, jigsaw, circular saw, nail gun, drill, sander staple, nails, staple gun, weatherproof sealant, and deer netting. Cut the plywood into 6 pieces. Lay down the back piece and assemble the three side pieces on it. Cut the deer netting to size and place it on the back pieces. Attach the top piece and small piece at the entrance of the bat house.
24. DIY Bat House Plan
This is a very simple and inexpensive design of a bat house. It is made for nothing less than $60 and the same approximate time of completion is 3 to 4 hours. The materials used include wood, plywood, straight edge, tape measure, safety glasses, drill, French curve, jigsaw, drill bits, and a staple gun.
25. How To Build A Bat House
To build this, you need a well-defined plan for the project. However, you can download a free plan for this by clicking the link below. Start by cutting the side pieces for the house then make a vent on each piece that corresponds to each other. Cut and rout the backboard so that it will be able to climb up easily. Cut and assemble other parts.
Building a bat house might seem awkward, but you might have to do it if you are having an infestation of bugs and mosquitoes in your surroundings. Check out the plans above, choose your preferred project, and start building. Thanks for stopping by, if you have questions or contributions regarding this article please use the comments section below.