As the world progresses, everybody is giving more attention to a much healthier and comfortable standard of living. Humidifiers add moisture to the air to prevent the human body from unnecessary dryness that can cause irritation.
Here are 18 awesome DIY humidifier ideas that can be made at home with ease. If you love humidifiers, you should check this article out!
1. DIY Humidifier
Are you looking for a very great way to recycle your old or abandoned materials? I've got this amazing humidifier for you to build.
Here is how to go about it:
First, get the following materials: 1-gallon empty plastic bottle, 1 PC/laptop cooling fan, 2-12 volt multi-voltage adapter, 3 mist makers, and a connector.
Connect the system and switch on the fan. Make an opening on the plastic bottle and insert the fog maker. Fit the fan to the opening for air to flow into the bottle. Make sure you use distilled water to prevent mineral build-up in the fog units.
2. DIY Dollar Store Humidifier
It doesn't matter the outlook of your humidifier, what is important is its effectiveness. This humidifier is somehow funny but it works perfectly fine.
To make this, you need a small bucket, a small bin basket that can fit into the bucket, a small fan, and some absorbent material.
Cut the absorbent into strips and suspend them in the bucket using the bin as their guide. After this, pour water into the bucket and make a hole by its side for the fan to fit in.
3. How To Build A Homemade Humidifier Using Ultrasonic Misters
This video shows you the steps of making a humidifier with the intent of helping you make your own. The instructor started by identifying the materials and parts of the humidifier, then he later talked about how he made each part.
4. How To Make Bulb Humidifier
Some other things need moist air apart from the body. An example of this is the mushroom fruiting chamber. This humidifier is made purposely for a mushroom fruiting chamber. It is made from a fog maker, Meanwell power supply, waterproof fan, sterilizing light, float, and tube kits.
5. DIY Automatic Humidifier
To make this dynamic humidifier, you will need Arduino, grove-button, grove temp, etc. To start with, you need to build a shell where you can fix the grove module. Then, the next step is to connect the modules and fix the software properties.
6. DIY Gecko Humidifier
Do you need a humidifier in your house? This is the best idea for you. The most common method of making a humidifier at home is by installing a mist maker inside a plastic container and connecting it with a power supply. The same process was used in this and it's very amazing and cool.
7. DIY A Humidifier
You just have to make this IoT humidifier because it comes with some awesome packages that you can't overlook. Let's see!
It has auto humidification that will start to moist once it detects the humidity is lower than the standard. The manual humidification allows you to start the humidifier.
Check out other features and procedures in the link below.
8. Homemade Humidifier
This humidifier is made from a small weight tight container, bottle, evaporating surface, small computer fan, electric plug, sponge, electrical fan, and 9-volt battery.
All you need to do is to assemble all the materials listed above and then, make a hole on the lid of the container. After this, connect the computer fan to a plug. Fit the fan to the lid and the bottle in the hole made.
9. How To Make A Rechargeable Mist Maker
In this video, you will learn how to make a rechargeable mist maker. It is very easy and can be made at home.
Let's see some steps on how this is been made;
First, get the necessary materials needed for the project, all the materials are listed in the description box of this video. After getting the materials, the next thing is discussed in the video.
10. DIY Automatic Air Humidifier
The evaporator used in this humidifier is a smart one because the humidifier sensor is built on an Arduino nano platform. It is a very mini humidifier and it requires a few cheap materials.
11. DIY Humidification - How-To
Humidifiers are a very amazing gadget to have in your room to increase the humidity in your room, especially during summer. The creator started by gathering all the materials needed for the project; he got all the power components from the "house of hydro" and the container and silicone from any other place.
Then, he first connects the power components and places the mist maker inside the container. He fixes the fan and funnel to the holes on the lid for air and water intake respectively.
12. How To Make A Humidifier With Water Bottle
What are you doing with your bottle if you're not making this beautiful humidifier? You don't need so many things, you only need some basic things which are listed in this video. By watching this video you will also learn how to make this humidifier from scratch.
13. How To Make Homemade Humidifier
There are different methods of making a humidifier without a fan or ultrasonic mist maker. Have you made a sponge humidifier before? absolutely no!
The method is quite simple; get a bowl of water and a sponge. Dip the sponge inside the bowl of water and let it absorb all the water, then take it to your room and open the sponge, it is going to release moisture into the room.
Click the link below to learn other beautiful ideas on how to make a humidifier without a fan or mist maker.
14. DIY Homemade Humidifier
Are you looking for a humidifier idea that is cheap to make? This is it! Let's go, if you have at least $10 and some hours of your day. We will need to get a plastic bottle, DC connect plug female, ultrasonic mist module, power supply, tape, and computer fan.
After getting all this, we need to make a hole in the bottle to fit the computer fan. Place the mist maker inside the bottle and connect all the components.
Note; you can use glue to have some permanent fittings.
15. How To Make Room Humidifier
To make this room humidifier, you need a plastic container with a lid, a cooling fan, ultrasonic mist maker, 24 volt DC power adapter, glue, and 2mm PVC pipe, and water. For this, you need three holes on the lid of the container; one semi-circle for the fan, two different size circular holes for the pipe, and the cord of the mist maker.
Place the mist maker inside the container and pass its cord through the hole on the lid. Glue the fan on a semi-circular hole and connect the mist maker to the power adapter.
16. DIY Ultrasonic Mist Maker
The main objective of building this ultrasonic mist maker is to compare the effectiveness of a homemade mist maker to a commercial one.
Let's see how it goes;
The plate metal disk used operates just like a speaker. The speaker when we pour water in it and vary the frequency, a vibration occurs and the water resonates with the frequency. On the other hand, for the plate, the water particles can not follow the oscillating motion and form an air bubble.
17. Super Automatic Air Humidifier DIY
One thing I like about this automatic humidifier is the disk drum. The disk drum is made for many CDs and rubber gaskets.
The disk drums are placed into the big transparent container with 4 disks on the bottom and sides for support. A pipe holder is then glued to the side of the container. You can spray water on it to make the glue fix quickly.
18. How To Make A Humidifier For Your Home
This large homemade humidifier is made from a plastic container, waterproof fan, and ultrasonic mist maker.
The first step is to drill a hole on top of the container to fit the waterproof fan. Then, drill two output holes for the moist air. Make sure the holes are big enough and sufficient to pull out the air or else the fog will try to come out from the fan and this can damage some structures.
Summer is around the corner! The air will be hot and humid, and the best way to prepare ahead is to make a humidifier. Choose any of the beautiful ideas above and you will be good to go. Thanks for stopping by!